Hach-Lange PHC101-30 Instruction Sheet - Manual

1
DOC302.53.00756
Instruction Sheet
PHC101-05, 101-10, 101-15, or 101-30 Probe
Safety
To ensure that the protection provided by this equipment is not impaired, do not use or install
this equipment in any manner other than that specified in this document.
Overview
Figure 1 shows the PHC101-05, PHC101-10, PHC101-15, or PHC101-30 Probe, a rugged,
non-refillable, gel-filled combination pH electrode with a built-in temperature sensor and a
bell-and-ring shroud, equipped with either a 5-, 10-, 15-, or 30-meter cable. The probe is
designed for fast, accurate pH measurement in wastewater, drinking water, and general field
applications.
This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.
Figure 1 The PHC101-05, PHC101-10, PHC101-15, or PHC101-30 Probe
1 Shroud 5 Color-code Clip Locations
2 Electrode Storage Cap 6 5-, 10-, 15-, or 30-meter Cable
3 Reference Junctions (remove protective film before use) 7 Electrode Storage Cap Lid
4 Ring 8 Sensor Array, including pH and Temperature Sensors