Hach-Lange CDC401-03 Instruction Sheet - Manual

1
DOC302.53.00755
Instruction Sheet
CDC401-01 or CDC401-03 Probe
Safety
To ensure that the protection provided by this equipment is not impaired, do not use or install
this equipment in any manner other than that specified in this document.
Overview
Figure 1 shows the CDC401-01 or CDC401-03 Probe, a 4-pole conductivity probe, equipped
with either a 1- or 3-meter cable. The probe is designed for fast, accurate measurement of
conductivity, salinity, resistivity, or total dissolved solids (TDS) in wastewater, drinking water,
and general applications.
Each electrode is supplied with color-code clips for easy identification. There are two each of
five colors (black, yellow, light green, light blue, and magenta), one for the electrode and one
for the cable connector.
This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.
Figure 1CDC401-01 or CDC401-03 Probe
1 Sensor Array, including Temperature Sensor and
4-pole Conductivity Sensor 3 1- or 3-meter Cable
2 Color-coded clip locations