Hach-Lange PHC101-03 Instruction Sheet - Manual

1
DOC302.53.00753
Instruction Sheet
PHC101-01 or PHC101-03 Probe
Safety
To ensure that the protection provided by this equipment is not impaired, do not use or install
this equipment in any manner other than that specified in this document.
Overview
Figure 1 shows the PHC101-01 or PHC101-03 Probe, a non-refillable gel-filled combination
pH electrode with a built-in temperature sensor, which is equipped with either a 1- or 3-meter
cable. The probe is designed for fast, accurate pH measurement in wastewater, drinking
water, and general applications.
Each electrode is supplied with color-code clips for easy identification. There are two each of
five colors (black, yellow, light green, light blue, and magenta), one for the electrode and one
for the cable connector.
This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.
Figure 1 The PHC101-01 or PHC101-03 Probe
1 Sensor Array, including pH and Temperature Sensors 4 1- or 3-meter Cable
2 Reference junction (remove protective film before use) 5 Electrode Storage Cap Lid
3 Locations for color code clip installation 6 Electrode Storage Cap