4 installation of the cleaning unit (optional), Installation of the cleaning unit (optional), Installation – Hach-Lange NISE sc User Manual
Page 17
Advertising
17
Installation
Figure 10
Probe assembly
3.4 Installation of the cleaning unit (optional)
Refer to the installation instructions for the cleaning unit for information on how to install
this on the probe.
Use the relay control on the sc controller to set the cleaning interval.
Select RTC (Real Time Clock) as the signal source. For details on more advanced relay
configuration, refer to the User Manual for the relevant sc controller.
1
Socket head screw
5
Probe housing
2
Reference system cap
6
Union nut
3
Sensor cartridge
7
Marker hole
4
Black gasket
8
Socket head wrench
Advertising