Hach-Lange NITRATAX sc Flow-through accessories - Manual

DOC273.52.90001
Instruction Sheet
Flow-through accessories installation for NITRATAX sc
Safety Information
Please read this entire document before unpacking, setting up or operating this
equipment. Pay attention to all danger and caution statements. Failure to do so could
result in serious injury to the operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired, do not use or
install this equipment in any manner other than that specified in this document.
Use of Hazard Information
DANGER
Indicates a potentially or imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially or imminently hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate
injury.
Important Note: Indicates a situation which, if not avoided, may cause damage to the
instrument. Information that requires special emphasis.
Note: Information that supplements points in the main text.
Precautionary Labels
Read all labels and tags attached to the instrument. Personal injury or damage to the
instrument could occur if not observed. A symbol, if noted on the instrument, will be
included with a danger or caution statement in the manual.
The sensor has additional accessories ( Figure 1 and Figure 2 ) and an optional
flow-through assembly ( Figure 5 ).
Unpack the flow-through unit
Remove the flow-through unit from the shipping container and inspect the items for
damage. Verify that all items listed are included. If any items are missing or damaged,
contact the manufacturer or distributor.
• Flow-through unit
• Allen key with orientation screw
• Tubing set
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.