Abocom AR3500 - Manual

ADSL Router
The ADSL Router provides the ideal solution for enjoying the Broadband
access anywhere. Based on the IEEE 802.3 standard and ADSL technology,
the ADSL Router transmits and receives data over the Telephone Line.
With the ADSL Router’s working maximum downstream rate of 8 Mbps and Upstream rate of 1Mbps you can
take full advantage of talking on the phone and navigating the Web at the same time with ADSL high-speed
access. We are committed to Speed and Connectivity.
Features
Compliance with T1.413 , T1.413 issue 2 , G.DMT and G.Lite
Supports PPPoA, PPPoE, IPoA , RFC1483 & RFC1577, Spanning Tree and Firewall Feature .
Support Auto MDIX .
Full Rate Adaptive modem
Maximum downstream rate of 8 Mbps.
Maximum upstream rate of 1Mbps .
Web based configuration management
Specification
• ADSL Compliance
1. Compliant with ADSL Standard
Full-Rate : ANSI T1.413 & T1.413 issue 2 , ITU
G.DMT
Splitterless : ITU G.Lite ( G.992.2 ) Standard .
2. Compliant with ADSL G.hs ( G.994.1 ) .
3. Support Annex A and Annex B .
4. DMT Modulation and Demodulation .
5. Full-Rate Adaptive modem
Maximum Downstream rate of 8M bps .
Maximum Upstream rate of 1M bps .
6. Support Dying Gasp Function .
7. Interoperable with all major DSLAM Equipment .
Protocols
ATM Protocol –
WAN Mode : PPPoA ( RFC2364 ) and PPPoE ( RFC
2516 )
LAN Mode : Bridge/Router MPoA ( RFC 1483 ) and
IPoA ( RFC 1577 )
ATM Forum UNI 3.1/4.0 PVC
Up to 8 VCs.
ATM SAR and ATM AAL5
OAM F4/F5
LAN Bridge Mode
Ethernet self-learning Transparent Bridge
( IEEE 802.1D )
Support up to 128 MAC Learning addresses .
Router Mode
Static routing
IP routing – RIPv2 ( Backward compatible
with RIPv1 )
DHCP ( Dynamic Host Configuration
Protocol ) Server and Client .
Dynamic NAT ( Network Address
Translation ) .
NAPT ( Network Address and Port
Translation ) .
ICMP ( Internet Control Message Protocol ) .
Simultaneous USB and Ethernet operation
IGMP