INSTEON On/Off Module - 2633-422 (France), 2633-432 (Germany), 2633-442 (UK), 2633-522 (AUS/NZ) Manual - Manual (Page 10)

Page 10 of 14 Rev: 1/21/2014 7:47 AM
Commands supported as responder
On Off
Fast-on Fast-off
Beep
Software configurable Yes
RF range Up to 50 meters (150 feet) open air
Phase bridge detect beacon Yes
INSTEON device category
0x02 appliance control
INSTEON device subcategory
2633-422 (France, 869.85 MHz) 0x2D
2633-432 (Germany, 869.85 MHz) 0x30
2633-442 (UK, 869.85 MHz) 0x35
2633-452 (Chile, 915 MHz) 0x3A
2633-522 (Aus/NZ, 921.0 MHz) 0x36
X10
X10 address 1 optional (comes unassigned)
X10 transmitter Yes
X10 receiver Yes
X10 status response Supported
X10 minimum transmit level 3.2 Vpp into 5 Ohms
X10 minimum receive level 20mV into 5 Ohms
X10 messages repeated No
Mechanical
Mounting
AC outlet
Wires
N/A
Screw clamp connections N/A
Case color White
Set button 1
Plastic UV stabilized polycarbonate
Beeper Yes
LED 1, RGB
Dimensions
10cm H x 4.3cm W x 3.4cm D - France
10cm H x 4.3cm W x 3.4cm D - Germany
10.4cm H x 5cm W x 3.5cm D - UK
10cm H x 4.3cm W x 3.4cm D - Chile
10.8cm H x 4.3cm W x 3.5cm D - AUS/NZ
Weight 130g ±10g
Operating environment Indoors
Operating temperature range 0
o
to 40
o
C / 32
o
to 104
o
F
Operating humidity range 0-90% relative humidity
Storage temperature range -20
o
to 70
o
C / -4
o
to 158
o
F