Americana Appliances 17 - Manual (Page 19)

19
Installation Instructions
REVERSING THE HARDWARE 4
4.1 Remove the base grille (if your refrigerator has
one) by pulling it straight out.
4.3 Interchange hinge (and the shim glued to it) and
screws at top right with screws at top left of cabinet.
Do not tighten screws on hinge side at this time.
NOTES:
• Some hinges have four holes. Which holes you
use for installing the hinge depends on which
side you install the hinge.
• The outer edge of the hinge should be parallel
to the edge of the case for correct installation.
Installing the hinge on the left. Installing the hinge on the right.
4.2 Move the bottom hinge bracket (and shim glued
to it) and plastic washer from the right side to the
left side.
Plastic
Washer
Hinge
Bracket
Models with a hinge bracket
that has 2 screw holes. Models with a hinge bracket
that has 4 screw holes.
Switch the hinge pin to the
opposite side of the bracket.
Plastic
Washer
Hinge
Bracket
4.4 Transfer door stop
Move the metal door stop from the right end to
the left end.
Door Stop
Left Side
4.5 Transfer door stop (cont.)
Move any screws from the left end to the
right end.
Right Side