Asante Technologies FS4008DS - Manual (Page 14)

Installation
Page 2-2
Components
This section describes the front- and back-panel layouts of the
FS4004DS and FS4008DS.
FS4004DS
The front panel of the FS4004DS consists of four 10/100 Mbps ports,
one Uplink port, and LED indicators. See Figure 2-1.
Figure 2-1 FriendlyNet FS4004DS front panel
The back panel of the FS4004DS consists of an AC power connector.
See Figure 2-2.
Figure 2-2 FriendlyNet FS4004DS back panel
∆
Note: The FS4004DS does not have a power switch.
The FS4004DS is automatically powered on as soon as
the power cord is connected to the FS4004DS and to a
power outlet
FS4004DS FriendlyNet
4-port Dual Speed Ethernet Switch
1 2 3 4 Uplink or
FDX /Col
100Mbps
Link/Act
1 2 3 4
Power
10/100Mbps Ports
Uplink Port
LEDs Four 10/100 Ports
AC Power Connector
FRCH1Book Page 2 Thursday, September 25, 1997 11:23 AM