INSTEON Hidden Door Sensor (2845-222) Manual User Manual
Page 10
10
Controller-Only
Some devices, like sensors, can only control
other devices.
The Motion Sensor will turn on the Switch
but the switches cannot control the Motion
Sensor.
NEW
X
Responder-Only
Some devices cannot control other devices;
these devices only receive INSTEON commands.
Some devices can only link as
responders to devices and scenes.
LED Bulb
Dimmer Switch
NEW
X
X
Understanding Linking
Grouping Devices
Use Cross Linking
You may want to group together two
devices, for example, in a virtual-three way
configuration. For INSTEON, this is called
Cross Linking.
To Cross Link, simply turn on the devices and
perform the linking process twice, once in
each direction.
To mirror Switch A and B so that they each
control one another and the connected
load, Cross Linking is necessary.
Link Switch A to Switch B and repeat to link
Switch B to Switch A.
NEW
X
NEW
X
A
B
Load
Motion Sensor
®
X
Dimmer Switch
A
B