AudioSource PreAmp/Tuner Two - Manual (Page 2)

Remote Sensor
Min Max
Volume
Tuning Power Tuner AM/FM +10 Auto Mono Memory
Left Right
Balance
Min Max
Treble
Min Max
Bass
5 Video 2
1 2 3
4 6
Video 1 Tape
7
CD
8 9 Video 3 Phono
Model PreAmp/Tuner Two
Stereo PreAmplifier and AM/FM Digital Tuner
Auto
FM
AM
104.5 Memory Stereo
15
MHz
KHz
Tuned
Power : Press this button to Turn "ON" the A.C. power to the PreAmp/Tuner Two. The
Red LED indicator will remain lit when the unit is ON.
Tuning : Press the TOP END of this button to RAISE the frequency of the AM/FM tuner.
Press the BOTTOM END of this button to LOWER the frequency of the AM/FM tuner.
Tuner : Press this button to select the Tuner as your input source. The Red LED will
indicate your selection.
AM/FM : Press this button to select between AM and FM bands. The Red LED and
Display window will indicate your selection.
Mono : Press this button to receive a station in "Mono". This Button is useful for "weak"
or "hard to capture" FM stations.
Memory : Press this button when entering stations into the tuner's "Memory". When
you've found a station to store into the tuner's memory, Press this button once, and then
press the numbered buttons (#1 to #9)
Auto : Press this button to choose between "Automatic" or "Manual" tuning of radio
stations. In the "Auto" mode, the tuner will scan directly from station to station, every time
the "Tuning" button is pushed. In the "Manual" mode, the tuner will advance "up" or
"down" incrementally, every time the "Tuning" button is pushed.
+10 : Push this button "In" to access the Tuner Presets #11 to #19. Keep this button in the
"Out" position to access the Tuner Presets #1 to #9.
#1 to #9 : Push these numbered buttons to listen to "Memorized" stations, or to enter
stations into "Memory".
Video 1 : Press this button to select "Video 1" as your input source. The Red LED will
indicate your selection.
Video 2 : Press this button to select "Video 2" as your input source. The Red LED will
indicate your selection.
Video 3 : Press this button to select "Video 3" as your input source. The Red LED will
indicate your selection.
Using The Controls
Memory
Video 3
Video 2
Video 1
5
+10
Auto
AM/FM
Mono
Tuner
Tuning
Power
4.