INTELLINET NETWORK 524445 User Manual - Manual (Page 30)

30
SYSTEM & NETWORK SETUP
2.6.3 Static DHCP Leases Table
This function allows you to assign a static IP address to a specific computer forever,
so you don’t need to set the IP address for a computer to enjoy the benefit of using
a DHCP server. A maximum of 16 static IP addresses can be assigned here.
NOTE: If you set “Lease Time” to “Forever” in the DHCP Server section, you can
also assign an IP address to a specific computer permanently; however, you won’t
be able to assign a certain IP address to a specific computer, since IP addresses
will be assigned in random order this way.
Enable Static DHCP Leases — Select to enable; de-select to disable.
MAC Address — Enter the MAC address of the computer or network device (a
total of 12 characters, with numerals from 0 to 9 and characters from a to f,
such as 001122aabbcc).
IP Address — Enter the IP address you want to assign to this computer or network
device.
Click “Add” to include a MAC address and IP address pair into the Static DHCP
Leases table (below). Click “Clear” to remove characters entered in a text field.
To delete a specific item, check the “Select” box of a MAC address and IP address
mapping, then click “Delete Selected.” To delete all mappings, click “Delete All.” To
deselect all mappings, click “Reset.”
2.7 Wireless LAN Configuration
If your computer, PDA, game console or other network device is equipped with a
wireless network interface, you can use the wireless function of this router to
connect to the Internet and share resources with other computers on your network.
It’s strongly recommended that you use the built-in security functions to protect