Pacmate, FIg. 1, FIg. 2 – intimus PacMate User Manual

Page 4: Initiation operation

Advertising
background image

APPLICATIONS:
The

PacMate is used for the manufacture of

packaging pads made from corrugated board or
other carton materials.

Only corrugated cartons and similar
materials may be fed into the machine
for processing into packaging pads!

The use of other materials may result in
bodily injury (e.g. due to splintering of hard
materials etc.), as well as damage to the
machine (e.g. destruction of the cutting
system etc.).

INSTALLATION:
- Assemble the unit as per the Assembly Instruc-

tions below.

- Plug in the machine (for instructions for the

necessary precautions see „TECHNICAL
DATA“.

The machine may only be used for its
intended purpose.
The mains connection at the machine
must be freely accessible!
Only operate the machine in enclosed
rooms at temperatures between 10°C
and 25°C!

EXPLANATION OF THE CONTROLS:
1 = Rocker switch (fig. 1)
(forward / stop / reverse)
This switch is for the following functions:

- position „I“

cutting systems runs forward

- position „0“

machine is switched off

- position „bowed arrow“

cutting systems runs backwards

OPERATING THE MACHINE:

- Turn machine on with rocker switch (1) (fig. 1)

(position „I“).

- The cutting system runs forward.

Due to danger of injury when later hand-

ling the packaging pads, existing metal

clips and staples must be removed by

means of a suitable staple remover

before cutting into packaging pads.

CUTTING CORRUGATED

STRIPS INTO PACKAGING PADS (Fig. 2):

- Feed the corrugated materials to the special

cutting system for the production of packaging

pads via the inlet guide.

- Remove the finished packaging pads after

processing is complete.

Never feed more than the maximum

allowable quantity of material into the

machine (see „TECHNICAL DATA“).

If a materials jam should nevertheless oc-

cur, refer to „MATERIAL JAM IN THE INLET

CHUTE“ under „MALFUNCTIONS“.

<< The machine may not be operated by more

than one person at any given time!

The machine was designed for safe operation
by “one person only”.

<< During the shredding process no other

work may be performed on the machine
(for example cleaning, etc.)!

<< The machine is not a toy, and is not suitable

for use by children!

The overall technical safety concept of this ma-
chine (dimensions, feed openings, emergency
shutdown devices etc.) does not provide for
any guarantee regarding hazard-free operation
by children.

<< Danger of injury!

Keep all

loose articles of clothing, ties,
jewelery, long hair or other loose
objects away from opening!

<< Danger of injury!

Never insert fingers into

opening!

<< In case of danger switch the machine off

with the mains switch, or with the emer-
gency switch, or unplug the machine!

<< Always unplug the machine from the

mains power supply before opening the
machine!

Repairs may only be performed by trained
personnel!

IMPORTANT SAFETY NOTES

1

PacMate

INITIATION

OPERATION

GB

fig. 1

4

fig. 2

Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung

Advertising