IQinVision 3 Series - Manual (Page 2)

Getting Started
1. Plug the IQeye camera into the network.
2. The IQeye 030S, 031S, and 032S cameras are powered via the
Ethernet using an IEEE 802.3af power source.
NOTE: The IQeye 03 Series camera can only be powered with a standard IEEE 802.3af PoE injector
or PoE switch. It CANNOT BE POWERED with DC or AC power sources.
3. The IQeye 03 series camera field of view and focus adjustment must
be performed using a browser to view the camera image.
PC Configuration of IQeye Cameras
PLEASE NOTE – The default user name for all IQeye devices is “root” and the default password is
“system”.
IQeye cameras are configured for DHCP and will have an IP address
assigned if a DHCP server is on the network. If a DHCP server is not
available, the camera IP address will need to be configured using
either IQfinder or IQmanager depending on the number of cameras
being installed.
1. Insert the IQtools CD in the CD drive of the PC. The IQfinder
installation application will launch automatically.
IQeye 03 Series Camera
2