IQinVision Sentinel Series - Manual (Page 8)

8
10 Terminating Power and Data Cabling Inside the Back Box
Power and data cabling must be routed to the right side (wall-side) of the back
box. Cut all cables with sufficient slack to reach the connector terminals in the
back box but not long enough to be pinched or obstruct the arm installation.
Figure 5
Camera-Side Terminations
Wall-Side Terminations
- RJ-45
- PunchDown Terminal
Screw Terminal
- Direct Power – 12-24VDC or 24VAC
- Trigger In
- Relay Out