Table 2, Figure 2 – ADC 100 User Manual
Page 5
ADCP-92-063 • Issue 1 • May 2005
Page 5
© 2005, ADC Telecommunications, Inc.
Figure 2. OptEnet Media Converter Converter
Any blinking of a Link LED indicates auto-negotiation in process. If a Link LED continues to
blink for more than 30 seconds then the operation of the far end device (i.e., duplex and speed)
needs to be verified or changed.
Table 2. Module LED Indicators
SIGNAL
COLOR
STATUS
TP Link
YELLOW
Auto negotiation complete, link status 10 Mb/s is OK.
GREEN
Auto negotiation complete, link status 100 Mb/s or 1000 Mb/s is OK.
OFF
Link status failed or no Ethernet detected.
Link
YELLOW
Auto negotiation complete, link status 10 Mb/s is OK.
GREEN
Auto negotiation complete, link status 100 Mb/s or 1000 Mb/s is OK.
OFF
Signal detect de-asserted, link status FAIL.
PWR
GREEN
Module Power OK
OFF
Module Power OFF
CONTROL
DESCRIPTION
Reset
If module supply voltage drops below a predetermined value the module shuts down,
pressing the reset button restarts the module.
20460-A
RJ45
CONNECTOR
OPTICAL
TRANSMIT
OPTICAL
RECEIVE