7450 series, Installation instructions – KING 7450 Series User Manual
Page 4
(714) 891-0008 • www.kinginstrumentco.com
When it comes to flow...we’re instrumental.
4
7450 Series
Installation Instructions
Installation Instructions
7450 series asseMbly
3p1-3p3/6p1-6p3 non-valve
parts list:
1. Outlet End Fitting
Block
2. O-Ring
3. Compression Fitting
4. Compression Seat
5. Outlet Seal
6. Outlet Float Stop
Holder
7. Float Stop /
Guide Rod Assembly
8. Float
9. Glass Meter Tube
10. Inlet Seal
11. Inlet Float Stop
12. Inlet And Fitting
Block
13. Side Plate /
Sheild Screw
14. Side Plate
15. Scale Side Plate
16. Shield (Clear)
17. Shield (White)
18. End Fitting
19. End Fitting Nut
20. Scale Bracket Screw
21. Scale Bracket
22. Scale Plate Screw
23. Scale Plate
7450 series asseMbly
3p1-3p3/6p1-6p3 inlet valve
parts list:
1. Outlet End Fitting
Block
2. O-Ring
3. Compression Fitting
4. Compression Seat
5. Outlet Seal
6. Outlet Float Stop
Holder
7. Float Stop /
Guide Rod Assembly
8. Float
9. Glass Meter Tube
10. Inlet Seal
11. Inlet Float Stop
12. Inlet End Fitting
Block
13. Side Plate /
Sheild Screw
14. Side Plate
15. Scale Side Plate
16. Shield (Clear)
17. Shield (White)
18. End Fitting
19. End Fitting Nut
20. Scale Bracket Screw
21. Scale Bracket
22. Scale Plate Screw
23. Scale Plate
24. Valve Assembly
12700 Pala Drive, Garden Grove, CA 92841
www.kinginstrumentco.com / (714) 891-0008
Meters are warranted against defects in materials and workmanship
to the original user for a period of thirteen (13) months from the date
of factory shipment, provided the meter is installed, operated and
maintained in accordance with King Instrument Company's
instructions and recommendations.
This warranty does not apply if failure is caused or contributed to by
any of the following: improper handling, improper storage, abuse,
unsuitable application of the product, lack of reasonable and
necessary maintenance, use exceeding suggested pressure and
temperature maximums, improper packaging for return, or repairs
made or attempted to be made by anyone other than King Instrument
Company, Inc.
KING INSTRUMENT COMPANY, INC. MAKES NO
WARRANTY AS TO THE FITNESS OF ITS PRODUCTS
FOR SPECIFIC APPLICATIONS.
This warranty is valid for the original end-user only and does not
apply to products that have been damaged or modified. This
warranty is non-transferrable and is limited to replacement or repair.
The liability of King Instrument Company arising out of its supply of
the products, or their use, shall not in any case exceed the cost of
correcting defects in the products as set forth above.
THIS WARRANTY IS A LIMITED WARRANTY AND
SHALL BE IN LIEU OF ANY OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THERE ARE NO OTHER WARRANTIES
WHICH EXIST BEYOND THE DESCRIPTION OR FACE
HEREOF.
IN NO EVENT SHALL KING INSTRUMENT COMPANY BE
LIABLE FOR LOSS OF PROFITS, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Products should be returned, prepaid, to King Instrument Company,
Inc. with proof of purchase. Call factory for Return Merchandise
Authorization (RMA) number and return instructions.
2013A
OUTLET END FITTING
O-RING
COMPRESSION FITTING
COMPRESSION SEAT
INLET SEAL
INLET FLOAT STOP
INLET END FITTING
SIDE PLATE /
SIDE PLATE
SCALE SIDE PLATE
OUTLET SEAL
OUTLET FLOAT STOP
FLOAT STOP /
FLOAT
GLASS METER TUBE
SHIELD (CLEAR)
SHIELD (WHITE)
END FITTING
END FITTING NUT
SCALE BRACKET
SCALE BRACKET
SCALE PLATE
SCALE PLATE
OUTLET END FITTING
O-RING
COMPRESSION FITTING
COMPRESSION SEAT
INLET SEAL
INLET FLOAT STOP
INLET END FITTING
SIDE PLATE /
SIDE PLATE
SCALE SIDE PLATE
OUTLET SEAL
OUTLET FLOAT STOP
FLOAT STOP /
FLOAT
GLASS METER TUBE
SHIELD (CLEAR)
SHIELD (WHITE)
END FITTING
END FITTING NUT
SCALE BRACKET
SCALE BRACKET
SCALE PLATE
SCALE PLATE
VALVE ASSEMBLY
BLOCK
BLOCK
SHIELD SCREW
HOLDER
GUIDE ROD ASSEMBLY
SCREW
SCREW
BLOCK
BLOCK
SHIELD SCREW
HOLDER
GUIDE ROD ASSEMBLY
SCREW
SCREW
4X
4X
4X
2X
2X
2X
4X
4X
4X
4X
2X
2X
2X
4X
12700 Pala Drive, Garden Grove, CA 92841
www.kinginstrumentco.com / (714) 891-0008
Meters are warranted against defects in materials and workmanship
to the original user for a period of thirteen (13) months from the date
of factory shipment, provided the meter is installed, operated and
maintained in accordance with King Instrument Company's
instructions and recommendations.
This warranty does not apply if failure is caused or contributed to by
any of the following: improper handling, improper storage, abuse,
unsuitable application of the product, lack of reasonable and
necessary maintenance, use exceeding suggested pressure and
temperature maximums, improper packaging for return, or repairs
made or attempted to be made by anyone other than King Instrument
Company, Inc.
KING INSTRUMENT COMPANY, INC. MAKES NO
WARRANTY AS TO THE FITNESS OF ITS PRODUCTS
FOR SPECIFIC APPLICATIONS.
This warranty is valid for the original end-user only and does not
apply to products that have been damaged or modified. This
warranty is non-transferrable and is limited to replacement or repair.
The liability of King Instrument Company arising out of its supply of
the products, or their use, shall not in any case exceed the cost of
correcting defects in the products as set forth above.
THIS WARRANTY IS A LIMITED WARRANTY AND
SHALL BE IN LIEU OF ANY OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THERE ARE NO OTHER WARRANTIES
WHICH EXIST BEYOND THE DESCRIPTION OR FACE
HEREOF.
IN NO EVENT SHALL KING INSTRUMENT COMPANY BE
LIABLE FOR LOSS OF PROFITS, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Products should be returned, prepaid, to King Instrument Company,
Inc. with proof of purchase. Call factory for Return Merchandise
Authorization (RMA) number and return instructions.
2013A
OUTLET END FITTING
O-RING
COMPRESSION FITTING
COMPRESSION SEAT
INLET SEAL
INLET FLOAT STOP
INLET END FITTING
SIDE PLATE /
SIDE PLATE
SCALE SIDE PLATE
OUTLET SEAL
OUTLET FLOAT STOP
FLOAT STOP /
FLOAT
GLASS METER TUBE
SHIELD (CLEAR)
SHIELD (WHITE)
END FITTING
END FITTING NUT
SCALE BRACKET
SCALE BRACKET
SCALE PLATE
SCALE PLATE
OUTLET END FITTING
O-RING
COMPRESSION FITTING
COMPRESSION SEAT
INLET SEAL
INLET FLOAT STOP
INLET END FITTING
SIDE PLATE /
SIDE PLATE
SCALE SIDE PLATE
OUTLET SEAL
OUTLET FLOAT STOP
FLOAT STOP /
FLOAT
GLASS METER TUBE
SHIELD (CLEAR)
SHIELD (WHITE)
END FITTING
END FITTING NUT
SCALE BRACKET
SCALE BRACKET
SCALE PLATE
SCALE PLATE
VALVE ASSEMBLY
BLOCK
BLOCK
SHIELD SCREW
HOLDER
GUIDE ROD ASSEMBLY
SCREW
SCREW
BLOCK
BLOCK
SHIELD SCREW
HOLDER
GUIDE ROD ASSEMBLY
SCREW
SCREW
4X
4X
4X
2X
2X
2X
4X
4X
4X
4X
2X
2X
2X
4X