Kolpin 86300 - Pack Mule ATV Trailer - Manual

Rev. 1
86300 Pack Mule ATV Trailer
Pack Mule ATV Trailer Assembly:
1. Pin the Tongue Tube to the Trailer using the (2) Bent Hitch pins and secure using the (2) R-Clips.
2. Attach the Swivel Wheel to the Trailer by using the (4) Bolts, Washers and Nuts provided.
1. 2.
Pack Mule ATV Trailer Mounting:
1. Slide the Tongue Tube into your 2” Receiver secure with 5/8’ Bent Hitch Pin.
2. There are multiple holes for positioning your Trailer during transport, as shown above.
Kolpin Powersports, Inc.
205 N. Depot Street, Fox Lake, WI
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com [email protected]
DESCRIPTION QTY. Spare P/N
Pack Mule Trailer 1 N/A
Tongue Tube 1 60051
Swivel Wheel 1 60052
5/8” x 3.00” Bent Hitch Pin* 2
R-Clip* 2
Hex Head Bolts* 4 60054
Washers* 4
Nuts* 4
Plastic Cap 10 60053
* Denotes what is included in the hardware pack.
Use the Spare P/N 60054 to order parts.
Tongue Tube Trailer
Pin