Kolpin 20053 – KOLPIN GUN BOOT 4.3 - Manual

Rev. 2
20053 – KOLPIN GUN BOOT 4.3
Bracket Assembly Instructions:
1. Attach the Swivel Plate (#2) to the Mounting Plate (#3) (as shown below) to best accommodate your
ATV, using
(2) ¼” x ¾” Truss Head Bolt and (2) ¼” Washers and Nylock Nuts. Slots are provided for
individual fitment to each machine.
2. Attach the Mounting Plate to your ATV using (3)
¼” – 20 U-Bolts, under the rack and up through the
Mounting Plate and secure using the (6) ¼” Nylock Nuts and (6) Washers. Tighten Securely. Place the
Rubber Caps over the protruding threads of the U-Bolt.
NO. Description QTY.
1 Gun Boot 1
2 Mounting Plate 1
3 Swivel Plate 1
4 Support Bracket 1
5 Rubber Bushing 1
6 3/8” Carriage Bolt 2
7 3/8” Turn Knob 2
8 3/8” Washers 2
9 ¼” – 20 U-Bolt 3
10 ¼” x ¾” Truss Head Bolt 2
11 ¼” - 20 Nylock Nut 8
12 ¼” Washer 10
13 Pin Lock 1
14 Rubber Caps 6
Carriage Bolt
Rubber Bushing
Swivel Plate
Turn Knob
Mounting Plate
Gun Boot
Support Bracket