Kolpin 89435 – PACK MOUNT - Manual

Rev. 2
89435 PACK MOUNT
Mounting Specific Instructions:
1. Using the ¼” Self Tapping Bolts provided, mount the Plastic Disk to any drillable surface
you see fit for storing you Kolpin Fuel Pack(s).
2. Place the fuel pack onto the Plastic Mount as shown.
3. Twist the “T” Knob into the Plastic Mount. Tighten on to tank.
4. To remove the Fuel Pack simply turn the knob a quarter turn and slide the tank off of the
Mount. To store, slide the Fuel Pack over the “T” Knob and onto the Plastic Mount. Turn
clockwise until you here it “Snap” into place.
NOTE: TANK NOT INCLUDED
NO. DESCRIPTION QTY.
1 MOUNTING DISK 1
2 “T” KNOB 1
3 ¼” SELF TAPPING BOLTS 4
Kolpin Outdoors, Inc.
205 N. Depot Street, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpinpowersports.com
[email protected]
Mount to any drillable surface.
Possibilities are endless, boats,
ATV’s, garage walls, campers, etc.