Kolpin 85145 – Honda Rancher AT 2 Receiver Hitch User Manual
Kolpin Hardware
Advertising
Rev. 1
85145 – Honda Rancher AT 2” Receiver Hitch
Hitch Mounting:
1. Remove both 10mm Bolts as shown below. Once bolts are removed be sure not
to put any weight on the machine, as the A-Arms may move out of position.
2. Slide the ¾” threaded stud, located on the bottom of the Kolpin Hitch, through the
hole on the OEM hitch.
3. Take the (2) 10mm bolts provided and insert them through the Kolpin hitch and
back through the A-Arm brackets and A-ARMS in reverse order of Step 1.
Description
Quantity
Rancher AT Hitch Weldment
1
10mm Hex Head Bolt
2
10mm Lock Nut
2
¾” Washer
1
¾” Nylon Nut
1
5/8” x 3.00” Bent Hitch Pin
1
R-Pin
1
Advertising