Kolpin 98500_98510 – KXP Expansion Plungers - Manual

Rev. 1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118 www.kolpin.com [email protected]
98500 / 98510
–
KXP Expansion Plungers
98500 Parts List: (Fits ATV) 98510 Parts List: (Fits UTV)
Item Description Quantity
1 KXP Handle 1
2 Rubber Expander* 1
3 Threaded Rod 1
Item Description Quantity
1 KXP Handle 1
4 Threaded Rod 1
5 Large Rubber Expander 1
6 Small Rubber Expander* 1
7 Large Plastic Spacer 1
5
2* 6*
4
1 1
3
7
Mounting Plate
Mounting Plate
1. Slide the expansion system together in
the order shown through the accessory
mounting plate and secure with the KXP
Handle-do not tighten at this time.
* NOTE: the rubber expander for both
systems has a counter-bored relief that
mates to the threaded rod. Please be
sure to install correctly!
2.
Place the accessory on the rack or bed
rail in the desired location and twist the
KXP handle clockwise, until tight, to
engage the plunger and secure the
accessory. Do Not Over Tighten-secure
fastening is possible without over
stressing components!
Kolpin now offers many accessory options for Polaris ATV and UTV models. For a complete listing of these KXP
accessories and Kolpin’s KXP Plungers that are compatible with Polaris® Lock & Ride® System, be sure to check
out www.kolpin.com , as new items will be coming soon.