Kolpin 53550 - Stealth Exhaust 2.0 User Manual
Kolpin Hardware
Rev. 2
53550 Stealth Exhaust 2.0
Safety Considerations:
1. Wear gloves during installations and be careful
when handling the metal pieces as some may have
sharp edges that can cause very bad cuts very
easily.
2. Do not block the visibility of the taillight on your
machine with the Stealth Exhaust.
3. CAUTION – BURN HAZARD!!!
Although the
Stealth exhaust does not get as hot as your OEM
muffler, be aware that under some conditions it
can cause severe burns. Like any other exposed
exhaust on an ATV, your Stealth Exhaust can get
hot enough to burn exposed skin.
NOTE:
A
Heat Shield (Kolpin P/N – 53560) is an available
option should you desire it.
General Installation Instructions – For Universal
Exhaust Kit
There are four basic mounting positions for the
system. Direct mount to the rear of existing
muffler, mid mount (such as Polaris example),
him mount tor rear of the ATV rack or Frame, and
high mount to extended rear rack/basket. These
instructions are general for all mounts, and are to be
used with the attached pictures of the different applications. Depending on your riding style and uses, the
higher mounts are generally more desirable for more extreme riding (dips, creek bottoms, etc.) to keep from
dragging the Kolpin Stealth Exhaust system. Leave at least 2 to 3 inches between the muffler and any
plastic components, to keep from melting or distorting the plastic.
NO. DESCRIPTION QTY.
1
Kolpin Stealth Exhaust
1
2 Mounting
Bands 2
3
“L” Shaped Tube
1
4
Mounting Strap (8 Holes)
1
5
1.50” Muffler Clamp
3
6 1.375”
Muffler
Clamp 1
7
25mm R Shaped Mounting Strap
1
8
28mm R Shaped Mounting Strap
1
9
31mm R Shaped Mounting Strap
1
10
Large Weld on Adapter
1
11
Small Weld on Adapter
1
12
Split Adapter Bushing 57 (1.125” to 1.25”)
1
13
Split Adapter Bushing 58 (1.25” to 1.375”)
1
14
Split Adapter Bushing 59 (1.375” to 1.50”)
1
15
Black Carriage Bolt (8mm x 35.5mm)
2
16
Black Lock Washer (8mm)
10
17
Black Nut (8mm)
10
18
Hex Head Bolt (8mm x 36.25mm)
1
19
Flat Washer (8.75 mm)
1
20
Lock Washer (8mm)
1
21 Nut
(8mm) 1
1
2
9
8
7
3
4
5
6
10
14
13
12
11
15
18
16
17
19
20
21
Number in parentheses ( ) indicates corresponding number
in the BOM (Bill of Materials).