Kolpin 97911 – Dually Lights User Manual
Dually lights
Rev. 1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
Dually Lights
(P/N - 97905, 97906, 97910, 97911)
Parts List:
Congratulations on your purchase of the best LED lighting solutions in the industry!
Dually Assembly:
This harness comes with an LED indicator on/off switch, inline fuse, battery leads and a weather proof plug.
With a set of lights there is also T-taps and an extension for the second light.
1. Use mounting hardware to attach light.
2. If you are running a pair of lights; use the supplied t-tap to piggy back onto the main harness.
3. Run the harness through the vehicle to use supplied switch. Wires on the back of the switch should
go in the following order with the led light on the top of switch. Black, Red, Red. See diagram
below.
Thank you for your purchase and enjoy the lights.
-
Install switch in your choice of location
-
Plug light into switch
-
Zip tie all wires out of harm’s way
-
Test light to ensure proper function
-
Limited Lifetime Warranty
Item Description
Quantity
1
Dually Light
1
2
LED Switch
1
3
Mounting Bracket
1
3
LED Indicator Light (on top)
The Dually Lights are available in a Flood or Spot
pattern. A flood light will give you a wider beam of
light, allowing you to see a larger area around you,
and a spot light will give you a narrower beam of
light, allowing you to see farther ahead. For
utility/slow speeds a flood light is preferred, and
for higher rates of speed a spot will allow you to see
further ahead. The difference is in the angle of the
refractor-a tighter angle is used for spot pattern, a
wider angle is used for a flood pattern.
Be sure to check out the complete line of lights
and lighting accessories from Kolpin! Another
great addition for your machine is our direct
replacement High Intensity Discharge (HID) Kit.
HID Kits are very easy to install and take the
place of your factory head light bulbs. Fit lists
are available on the website at