KT&C KPC-HDV120F - Manual (Page 21)

21
9. OSD MANUAL
IMAGE
- GAMMA : Use the SET button to go to the GAMMA sub menu.
- SHARPNESS : Use the LEFT/RIGHT button to adjust the sharpness value.
- CONTRAST : Use the LEFT/RIGHT button to adjust the contrast value.
- SATURATION : Use the LEFT/RIGHT button to adjust the saturation level.
- DNR : Use the LEFT/RIGHT button to select the digital noise reduction level. - OFF, LOW, MIDDLE, HIGH
GAMMA (Sub Menu)
- Y GAMMA : Use the LEFT/RIGHT button to select preset gamma setting for luma.
- C GAMMA : Use the LEFT/RIGHT button to select preset gamma setting for chroma.
SYSTEM
- FIRMWARE VER : Information of camera’s firmware version.
- COMMUNICATION : Use the SET button to go to the COMMUNICATION sub menu.
- SDI FRAME RATE : Use the LEFT/RIGHT button to select the SDI output video frame rate
- 30HZ , 25HZ
- CVBS FORMAT : Use the LEFT/RIGHT button to select the TV out video format - NTSC, PAL
- FACTORY RESET : Use the SET button to action start of reset.
Clear all setting and initialize to factory setting.
IMAGE
+ GAMMA
+ SHARPNESS 7
+ CONTRAST 17
+ SATURATION 18
+ DNR OFF
* ESC
* EXIT
GAMMA
+ Y GAMMA PRESET 2
+ C GAMMA PRESET 3
* ESC
* EXIT
SYSTEM
+ FIRMWARE VER 3.07D.02F
+ COMMUNICATION
+ SDI FRAME RATE 30HZ
+ CVBS FORMAT NTSC
+ FACTORY RESET
* ESC
* EXIT