KT&C KPC-HD(N)V122 - Manual (Page 17)

17
9
. OSD MANUAL
3. WDR / BLC
- MODE : Select WDR for BLC mode.
• WDR
: Act in wdie dynamic rage mode. Controled video frame rate in 1/2.
• BLC : Act in Backlight compensation mode.
• D-WDR
: Digital wide dynamic range control.
- WDR WGT : WDR weight control level settig at WDR mode.
- BLC OSD : Display BLC control zone in screen.
- BLC POS-X : Select BLC control zone vertical position.
- BLC POS-Y : Select BLC control zone horizontal position.
- BLC SIZ-X : Select BLC control zone vertical size.
- BLC SIZ-Y : Select BLC control zone horizontal size.
4. DNR: Reduce image’s noise
5. DAY & NIGHT
- MODE : Select TDN(True Day & Night control) mode.
• AUTO
: Camera controlled automatically to decide day or night
environment using input level data from CDS sense.
• COLOR : Fix to mode at day environment setting.
Make video image act in color.
• B&W
: Fix to mode at night environment setting.
Make video image act in B/W.
■
D/N DETECT : Select AGC or CDS control for TDN auto control.
■
DELAY : Delay time for change day or night mode at auto mode.
■
D->N LEVEL : Threshold level(AGC or CDS) for change Day to Night mode.
■
N->D LEVEL : Threshold level(AGC or CDS) for change Night to Day mode.
6. IMAGE
- SHARPNESS : Adjust image sharpness level.
- GAMMA : Gamma Curve Select.
- FLIP : Vertical & Horizontal flip setting.
- LENS SHADING : Enable lens shading compensation.
- DZOOM
: Select digital zoom magnification.
7. SPECIAL
- PRIVACY : Setting for protect private area in image using mask setting.
• ZONE NO.
: Select private mask zone number.
• ZONE OP.
: Select zone mask display on/off.
• X-POS
: Select zone horizontal position.
• Y-POS
: Select zone vertical position.
• X-SIZ
: Select zone horizontal size.
• Y-SIZ
: Select zone vertical size.
• COLOR : Select mask color
• TRANS.
: Select mask transparency level.