Alpha Professional Tools AEP-458 - Manual (Page 13)

ALPHA CERAMICA THREE PART SYSTEM
Part 3: Ceramica Buff
Super fine abrasive type disc that brings out a deep glossy reflection
with a mirror finish.
Use in place of messy polishing powders and dangerous chemicals for
final polishing.
Alpha Ceramica is a three part system for polishing granite, hard marble and porcelain ceramics. Utilizing
the best grade industrial diamonds and the best bond materials, Alpha Ceramica is sure to provide the best
possible finish on your polished stone.
Part 1: Ceramica Vitrified and Ceramica Metal
Long lasting and aggressive design.
Rigid or flexible depending upon application requirements.
Use for light shaping work, smoothing and preparing for the
polishing process.
Part 2: Ceramica Resin
Fine grade diamonds are heat sintered in a hard resin bond within a
flexible matrix.
Each grit covers the previous grit and through the process closes the
pores for a natural polish.
After the last grit, a solid natural polish is achieved.
Key: NR = Not Recommended R = Recommended HR = Highly Recommended
Alpha Ceramica is designed for a variety of
applications and can be used in the polishing
shop and at the job site. A long time standard
in the fabrication area, there are no other
systems with the same capability for a deep
glossy finish.
•
•
•
•
•
•
•
•
APPLICATION VITRIFIED RESIN METAL
Ogee Edge NR R HR
Undermount Sink Hole NR R HR
Inside Corners NR R HR
Bull Noses HR R R
PERFORMANCE VITRIFIED RESIN METAL
Durability HR R HR
Flexibility R HR HR
Cutting HR R HR
POLISHING AREAS VITRIFIED RESIN METAL
Concave R HR HR
Convex HR R R
Flat R NR HR
12