KT&C KPC-HDB230M - Manual (Page 2)

Image Device 2.1 Mega Pixel, 1/3” Exmor SONY CMOS
Video output mode
HD-SDI: 1080p@30, 1080p@25, 720p@60, 720p@50
TV Out: NTSC / PAL selectable
Effective Pixels 1984 (H) x 1105 (V)
Unit cell size 2.8um (H) x 2.8um (V)
S/N Ratio More than 50dB
Minimum Illumination 0.1 Lux
Video Output HD-SDI / 1.0 Vp-p Composite ( 75Ω ).
Lens Board Lens, Pinhole Lens
Shutter speed Auto / Manual selectable
D-WDR / BLC OFF / BLC / D-WDR
3DNR OFF / LOW / MIDDLE / HIGH
Controllable Max Gain 23 dB
White Balance AUTO / AUTOext / PUSH / MANUAL
Digital Zoom Ratio 1X ~ 20X
Digital Slow Shutter OFF, X2 ~ X8
Privacy Masking Zone 16 ea , On / Off
Day & Night Digital Day & Night
OSD Remote Control
Operating Temperature 14°F~112°F (-10°C~+50°C)
Storage Temperature -4°F~158°F (-20°C~+70°C)
Power Consumption DC12V (±10%), Max. 110 mA
Dimensions (mm) 23.0(Ø) x 77.5(WaterProof Cap Housing only)
Weight Approx. 90g
IP Rating IP67 (WaterProof Cap Housing only)
Specifications and designs are subject to change for improving the functionality of this product without notice.
OSD MANUAL
SPECIFICATION
MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU
EXPOSURE
BRIGHTNESS 0 ~ 20
AE MODE NORMAL / DEBLUR
SHUTTER
AUTO /
MANUAL /
FLICKER
LEVEL
1/30(25),1/60(50),
1/120(100),1/240,1/500,
1/1K,1/4K,1/8K,1/16K,
1/30K,1/60K
RETURN BACK / EXIT
DSS Off / X2 / X3 / X4 / X5 / X6 / X7 / X8
AGC 0 ~ 20
RESET DATA BACK / DEF
RETURN BACK / EXIT
WHITE
BALANCE
WB MODE AUTO / AUTOext
/ PUSH / MANUAL
COLOR TEMP LOW / MIDDLE / HIGH
R-GAIN 0 ~ 20
B-GAIN 0 ~ 20
RETURN BACK / EXIT
SATURATION 0 ~ 20
RESET DATA BACK / DEF
RETURN BACK / EXIT
D-WDR /
BLC
OFF / BLC /
D-WDR
H-POS 0 ~ 20
V-POS 0 ~ 20
H-SIZE 0 ~ 20
V-SIZE 0 ~ 20
RETURN BACK / EXIT
DNR OFF / LOW / MIDDLE / HIGH
DAY &
NIGHT
AUTO/ COLOR /
B&W
AGC THRES 0 ~ 20
AGC MARGIN 0 ~ 20
DELAY LOW / MIDDLE / HIGH
RESET DATA BACK / DEF
RETURN BACK / EXIT
IMAGE
SHARPNESS 0 ~ 20
GAMMA 0.45 / 0.5 / 0.55 / 0.6 / 0.65
MIRROR OFF / ON
FLIP OFF / ON
DZOOM 1.0X / 1.1X / 1.2X / 1.3X …… 7.7X / 7.8X / 7.9X / 8.0X
DEFOG OFF / ON
MODE AUTO / MANUAL
LEVEL LOW / MIDDLE / HIGH
RETURN BACK / EXIT
LENS SHADING OFF / ON
WEIGHT 0% ~ 100%
RETURN BACK / EXIT
RESET DATA BACK / DEF
RETURN BACK / EXIT
SPECIAL
FOCUS ASSIST OFF / ON
PRIVACY OFF / ON
ZONE NUM 0 ~ 15
ZONE OP OFF / ON
H-POS 0 ~ 60
V-POS 0 ~ 40
H-SIZE 0 ~ 40
V-SIZE 0 ~ 40
Y LEVEL 0 ~ 10
CR LEVEL 0 ~ 10
CB LEVEL 0 ~ 10
RETURN BACK / EXIT
HLMASK OFF / ON
LEVEL 0 ~ 20
COLOR BLK / WHI / YEL / CYN /
GRN / MAG / RED / BLU
RETURN BACK / EXIT
PATTERN OFF / ON
RESET DATA BACK / DEF
RETURN BACK / EXIT
SYSTEM
SDI FORMAT 1080P / 720P
FRAME RATE 30(60) / 25(50)
CVBS FORMAT NTSC / PAL
APPLY OK / ON
LANGUAGE ENG / CHN / CHN(S)
SYSTEM INFO
S/W VERSION
SET VERSION
RETURN
BACK / EXIT
REBOOT
RETURN
BACK / EXIT
• Function Description
0. SETUP
- EXPOSURE: Go sub menu for camera exposure control.
- WHITE BALANCE: Go sub menu for camera white balance control.
- WDR/BLC: Go sub menu for camera WDR or BLC action.
- DNR: Control noise reduction setting.
- DAY & NIGHT: Go sub menu for camera day & night control.
- IMAGE: Go sub menu for adjust image functions.
- SPECIAL: Go sub menu for special feature control.
- SYSTEM: Go sub menu for system control & information.
- Reset Data All: Reset camera’s all feature data to default value.
1. EXPOSURE
- BRIGHTNESS: Adjust image brightness value.
- AE MODE: Adjust AE control Mode.
- SHUTTER: Select shutter speed control type.
LEVEL: Adjust shutter speed at manual shutter mode.
- DSS: Adjust digital slow shutter control level.
- AGC: Adjust max gain level for brightness control.
2. WHITE BALANCE
- WB MODE: Select white balance control mode.
AUTO: Full auto control mode in color temperature rage 2300K~10000K
AUTOext: Extened auto mode for special illumination.
PUSH: Enable fix the control setting for specific environment.
Push & release, for fix WB control setting
MANUAL: Enable WB control setting by user’s intention.
>COLOR TEMP: Select color temperature range for WB control at
manual mode
>R-GAIN: Adjust red color gain for WB control at maual mode.
>B-GAIN: Adjust blue color gain for WB control at manual mode.
- SATURATION: Adjust image brightness value.
3. WDR/BLC
- MODE: Select WDR for BLC mode.
BLC: Act in Backlight compensation mode.
D-WDR: Digital wide dynamic range control.
- BLC H-POS: Select BLC control zone vertical position.
- BLC V-POS: Select BLC control zone horizontal position.
- BLC H-SIZE: Select BLC control zone vertical size.
- BLC V-SIZE: Select BLC control zone horizontal size.
4. DNR: Reduce image’s noise
5. DAY & NIGHT
- MODE: Select DN( Digital Day & Night control ) mode.
AUTO: Camera controlled automatically to decide day or night
environment using AGC calculation data.
COLOR: Fix to mode at day environment setting.
Make video image act in color.
B&W: Fix to mode at night environment setting.
Make video image act in B/W.
> AGC THRES: Threshold level for Change Day to Night or Night to
Day mode.
> AGC MARGIN: Hysteresis Level for Change Day to Night or Night to
Day mode.
> DELAY: Delay Time for change day or Night Mode at Auto mode.
6. IMAGE
- SHARPNESS: Adjust image sharpness level.
- GAMMA: Gamma Curve Select.
- MIRROR: Vertical Mirror Setting.
- FLIP: Horizontal flip setting.
- DZOOM: Select digital zoom magnification.
- DEFOG: Enable Defog compensation.
LEVEL: Defog compensation Level change at Auto / Manual mode.
-LENS SHADING: Enable lens shading compensation.
7. SPECIAL
- FOCUS ASSIST: Enable Lens Focus Assist OSD. ( 1080P Mode Only ).
- PRIVACY: Setting for protect private area in image using mask setting.
ZONE NUM. : Select private mask zone number. V-SIZE : Select zone vertical size.
ZONE DISP. : Select zone mask display on/off. Y LEVEL : Select mask color ( Y Level ).
H-POS : Select zone horizontal position. CR LEVEL : Select mask color ( CR Level ).
V-POS : Select zone vertical position. CB LEVEL : Select mask color ( CB Level ).
H-SIZE : Select zone horizontal size.
- HLMASK: Mask image high light area.
LEVEL : Select high light level.
COLOR : Select mask color
- PATTERN: Color bar display Enable.
8. SYSTEM
- SDI FORMAT: 1080P / 720P
- SDI FPS: 30 or 25 fps in 1080p mode,
720P Mode: 60 / 50 fps.
- CVBS FORMAT: NTSC / PAL
- APPLY: Apply all video setting changed at once. Use the Set button to apply.
- SYSTEM INFO
S/W VERSION: Camera’s basic software version.
SET VERSION: Camera’s feature control setting version.