KT&C KPC-HNV522MB - Manual (Page 17)

9. OSD MANUAL
3. D-WDR / BLC
- MODE : Select D-WDR / BLC mode.
> BLC : Act in Backlight compensation mode.
> D-WDR : Digital wide dynamic range control.
- BLC OSD : Display BLC control zone in screen.
- BLC POS-X : Select BLC control zone vertical position.
- BLC POS-Y : Select BLC control zone horizontal position.
- BLC SIZ-X : Select BLC control zone vertical size.
- BLC SIZ-Y : Select BLC control zone horizontal size.
4. DNR: Reduce image’s noise
5. IMAGE
- SHARPNESS : Adjust image sharpness level.
- GAMMA : Gamma Curve Select.
- FLIP : Vertical & Horizontal flip setting.
- LENS SHADING : Enable lens shading compensation.
- DZOOM : Select digital zoom magnification.
6. SPECIAL
- PRIVACY : Setting for protect private area in image using mask setting.
• ZONE NO. : Select private mask zone number.
• ZONE OP. : Select zone mask display on/off.
• X-POS : Select zone horizontal position.
• Y-POS : Select zone vertical position.
• X-SIZ : Select zone horizontal size.
• Y-SIZ : Select zone vertical size.
• COLOR : Select mask color
• TRANS. : Select mask transparency level.
- HLMASK : Mask image high light area.
• LEVEL : Select high light level.
• COLOR : Select mask color.
- PATTERN : Color bar display Select.
17