KT&C KPC-HDN552M - Manual (Page 16)

9. OSD MENU STRUCTURE
- BLC POS-X : Select BLC control zone vertical position.
- BLC POS-Y : Select BLC control zone horizontal position.
- BLC SIZ-X : Select BLC control zone vertical size.
- BLC SIZ-Y : Select BLC control zone horizontal size.
4. DNR: Reduce image’s noise
5. DAY & NIGHT
- MODE : Select TDN(True Day & Night control) mode.
> AUTO : Camera controlled automatically to decide day or night
environment using CDS calculation data.
> COLOR : Fix to mode at day environment setting.
Make video image act in color.
> B&W : Fix to mode at night environment setting.
Make video image act in B/W.
6. IMAGE
- SHARPNESS : Adjust image sharpness level.
- GAMMA : Gamma Curve Select.
- FLIP : Vertical & Horizontal flip setting.
- LENS SHADING : Enable lens shading compensation.
- DZOOM
: Select digital zoom magnification.
7. SPECIAL
- PRIVACY : Setting for protect private area in image using mask setting.
• ZONE NO. : Select private mask zone number.
• ZONE OP. : Select zone mask display on/off.
• X-POS : Select zone horizontal position.
• Y-POS : Select zone vertical position.
• X-SIZ : Select zone horizontal size.
• Y-SIZ : Select zone vertical size.
• COLOR : Select mask color
• TRANS. : Select mask transparency level.
- HLMASK : Mask image high light area.
• LEVEL : Select high light level.
• COLOR : Select mask color.
- PATTERN : Color bar display Select.
- DISPLAY INFO. : Camera information OSD on/off.
• CAMERA ID.
16