KT&C KPC-LP500NH - Manual (Page 7)

5 . I n s t a l l a t i o n
• MOUNTING POSITION
7
360 ˚
90 ˚ 360 ˚
After adjusting zoom and focus,
to prevent water infiltration, firmly
tighten the zoom and focus levers.
WARNING !
To prevent injury, this apparatus must be securely
attached to the mounting surface with sufficient
strength to hold the weight of the camera including
wind and snow loading in accordance with the
installation instructions.
360 ˚
Loosen socket head allen screws to change angle
and/or rotate body about base.
Loosen this lock ring
to rotate camera body.