KT&C KPC-LV40NU - Manual (Page 9)

5. INSTALLATION
(Plastic Dome)
1. Attach the FLAT DOME on the ceiling with using
the screws provided, considering the camera
angle required for the surveillance function.
2. Adjust the LENS ANGLE to the desired
location by hand.
3. Connect the VIDEO OUT CABLE and check the
video image. Change the SETTINGS accordingly
using the OSD controller.
4. After the LENS SETTING is completed,
install the TOP COVER.
9
TAPPING SCREW (4 x 20L) - 3EA
TOP HOUSING
(Assembly direction)
TOP HOUSING
(Separation Direction)
ASSEMBLY HOOK
(2 point)
M4 STAR SCREW
L-WRENCH(T-20)
<TILT ANGLE : 20~90°>
TILT: +90°
TILT: 0°
TILT: +20°
PAN: ±10°
PAN: 0°
<PAN ANGLE : ±10°>
* FIXED TAPE:
It attached when you install the
product in areas where vibration occurs.
FIXED TAPE attached examples.
SECOND VIDEO CABLE
OSD CONTROLLER
* FIXED TAPE
TILT 45° when attaching TILT 90° when attaching