KT&C KPC-VDE101NUV7 - Manual (Page 10)

① Installation of the camera with SURFACE
CASE(using M4x40)
② Installation of the camera with SCREWS
③ Installation of the camera with JUNCTION BOX
① Installation of the camera on the wall
② Installation of the camera on the 3/4” NPT PIPE
③ Installation of the camera on the JUNCTION BOX
Check the safe wire which
should be entirely inserted into camera
housing during locking the dome cover to
maintain Waterproof condition.
When using the camera
without LED take off the rubber.
N O T E
5. Installation
1. Installation of Flush Mount
2. Installation of Surface Mount
PIPE
PI
PE
10