KT&C KPC-N751NU - Manual (Page 23)

9. OSD MANUAL
- MOTION DETECT : Motion detection function.
① MOTION MODE : Enable user to set up ON/OFF
② LEVEL : Enable user to setup a motion detect sensitivity (0~3)
③ V START : Motion area Vertical start position.
④ V END : Motion area Vertical end position.
⑤ H START : Motion area Horizontal start position.
⑥ H END : Motion area Horizontal end position.
⑦ INITIAL : Enable user to initialize setting of
MOTION DETECT.
- DISPLAY: Enable user to set up a screen marking of CAM ID, CAM TITLE, MOTION DETECT.
① CAM ID:
Enable user to set up output on Camera ID screen
② CAM TITLE :
Enable user to set up output in fixed CAM TITLE
③
MOTION DETECT: Enable user to set up out put of
MOTION on the screen as MOTION DETECT ON setting.
④ INITIAL : Enable user to initialize of DISPLAY menu.
- DEFECT : The white pixel detection and compensation function can automatically detect and
compensate up to 64 white pixels.
① COMPENSATION : DEFECT COMPENSATION On/Off..
② DETECTION : White pixel detection..
8. FACTORY DEFAULT
: Enable user to reset all of the status as the factory default Setting up using
LEFT, RIGHT KEY.
9. EXIT
: Enable user to EXIT the OSD menu Setting up using LEFT, RIGHT KEY.
23
MOTION DETECT
>ZONE NO 0
MOTION MODE ON
LEVEL 4
V START 7
V END 12
H START 10
H END 19
INITIAL
RETURN
DISPLAY
CAM ID ON
CAM TITLE ON
MOTION DETECT ON
INITIAL
RETURN
DEFECT
>COMPENSATION ON
DETECTION (
↓
)
RETURN