Installation, Monitor connection – KT&C KPC-WDR7000NU User Manual
Page 14
Advertising
5. INSTALLATION
• MONITOR CONNECTION
(1) DC12V
(2) DC12V/AC24V
* As the connecting method varies with instruments, refer to the
manual supplied with the instrument.
* Only connect the cable when the power is turned off.
* Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device
13
DC12V REGULATED
POWER SUPPLY
BNC FEMALE
VIDEO
VIDEO IN
DC12V / AC24V REGULATED
POWER SUPPLY
BNC FEMALE
VIDEO
VIDEO IN
Class 2 Only
Class 2 Only
Class 2 Only
Advertising