Cleveland Motion Controls Current Regulator PowerBlock2 MO-13829 - Manual

Current Regulator
MO-13829
Schematic diagram :
105
5
7
Technical features:
Regulated current power supply based on microcontroller
technology
Accurate current output control
High level of protection against transients (short-circuit
& circuit opening)
Remote control via potentiometer or analog 0 to 10V input
Freewheel and Holding modes selected from external
contacts or analog voltages
Selected mode status shown by front face LED’s
Real time Current equivalent voltage output available
Plug-in connectors
Compact enclosure with integrated DIN rail mount
CE - CEM compatible
45
100
Dimensions :
µP
Set Point
Freewheel
mode Holding
mode
+
Brake/Clutch
Shunt
(real time
current value)
Benefits :
Input voltage [ V ] 24 AC / DC
Max output current [ A ] 2
Output load (resistance) [ ohm ] 4 - 20
Max power consumption [ VA ] 70
Remote voltage control [ V ] 0 - 10 DC
Ambient temperature [ ° F ] +10 ... +40
Weight oz. 6
DIN rail
fixing (35)
PowerBlock2
Freewheel mode: Load is electrically decoupled
and allowed to move freely
Holding Mode: Load is restrained from
movement to the full capability of the unit, as
defined by the Max Current Adjustment
(switches S1, S2 and S3)
Supplies and Regulates
Current to EMAG Brakes
and Clutches