Clock Audio CW 200 - Manual (Page 15)

14
Specifications
Main frame size: EIA STANDARD 1U
Dual channel receiver
Frequency stability ± 0.005%, Phase Lock Loop frequency control
Carrier frequency range UHF 602-634 MHz (subject to local authorities enforcement laws)
Digital equalizer preset microphone capsule modelling
Modulation mode FM
Operating range 60 Metres typical (in open space)
Oscillation PLL synthesized
Sensitivity 5dBμV, S/N>60dB at 25 deviation
Band width 32MHz
Max deviation Range ±45KHz
Frequency response 80Hz~18KHz±3dB
Power Supply switched mode ac adaptor 100-240V AC50/60 Hz, 10W
Weight 4KG
Dimension 421(W) X 43(H) X 206(D)
Output connector XLR balan
ced & 6.3φ phone jack unbalanced
Transmitter
Element: 2 x Fixed-charge back plate, permanently polarized condenser microphones.
Polar pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
Carrier Frequency Range: 602MHz~634 MHz (subject to local authorities enforcement laws)
Modulation mode: FM
Frequency Response: 50-17,000 Hz
Max deviation range : ±45 KHz
Operating range: 60 Metres typical ( in open space)
Current consumption: 90mA, typical
RF power output: 30mW
Dynamic range (Typical):> 90 dB,1kHz at Max SPL
Battery: AA X 2 Alkaline (each transmitter)
Battery life: Approximately 10 hours
Specifications / improvements are subject to change without notice.
.