CNB MDC4050VR - Manual (Page 7)

7
Network Camera_ User manual
2. Configuration in Admin Mode
The detailed operational parameters of the product can be configured through Admin Mode via network.
2.1. Access
The access to Admin Mode can be done using 2 ways; through Internet Explorer and the “ NVR-Pro ”
program.
1. Using Internet Explorer
Type in the connection address of the product in the address field of the Internet Explorer as
followings:
http://[IP address of the product]/admin.htm
Example : http://172.16.64.133/admin.htm
If you changed the HTTP port of the product from default value (80) you can access to Admin mode
by adding HTTP port address as the following:
http://[device IP address]:[HTTP port]/admin.htm
Example : http://172.16.64.133:8080/admin.htm
2. Using the “ NVR-Pro ”
Select video channel in the viewing window of “ NVR-Pro ”. Selected video channel will be highlighted,
then Click button on the right side of the display screen to access to admin mode.
Figure 2-1. Access to admin Mode from “NVR-Pro”