Aiwa XR-EM50 - Manual (Page 12)

12
En
TAPE PLAYBACK
Playback
Use only type I (normal) tapes.
1 Press zPUSH EJECT to open the cassette holder.
2 Insert the tape.
Insert with the exposed side down, and press zPUSH
EJECT to close the cassette holder.
3 Press d to start play.
To select a reverse mode
Hold down SHIFT and press REV MODE repeatedly on the
remote control.
The mode changes as follows;
"p" : Plays one side only
"[" : Plays from the front side to the back sides once.
"]" : Plays both sides repeatedly
To stop playback
Press s.
To change the playback side
Press d in playback mode.
To rewind or fast forward
Press f or g.
To reset the tape counter
Press s in stop mode, and the tape counter on the display is
reset to "0000".
Opening and closing the cassette holder will also reset the
tape counter.
To eject the tape
Press z PUSH EJECT after the deck stops completely.
SHIFT
f , g
f , g
s
z PUSH
EJECT
AUX
w REC/
REC PAUSE
SYNCHRO
REC
d
s
FUNCTION
REC/
REC PAUSE
REC MUTE
d
TUNER MODE
REV MODE
Notes on cassettes
•Use of 120-minute or longer tapes is not recommended
since they are extremely thin and easily deformed or
damaged.
•Wind up any slack in the tape with a pencil or similar tool
before use. Slack tape may jam in the mechanism.