Osd menu, Auto exposure setup – CNB SS2965PXW User Manual
Page 26
XPEED Outdoor Series WWW.CNBTEC.COM
26
4. OSD Menu
■ AUTO EXPOSURE SETUP
# To use the AUTO EXPOSURE, Please refer to below table.
EXPOSURE
3D-DNR
Day&Night
BACKLIGHT
ON
OFF
AUTO
D&N
OFF
WDR
ECL
BLC
IRIS
AUTO
O
O
O
O
O
O
O
O
MANUAL
O
O
O
O
O
X
O
O
SHUTTER
AUTO
O
O
O
O
O
O
O
O
A-FLK
O
O
O
O
O
O
O
O
MANUAL
O
O
O
O
O
X
O
O
OFF
O
O
O
O
O
X
O
O
GAIN
HIGH
O
O
O
O
O
O
O
O
MIDDLE
O
O
O
O
O
O
O
O
LOW
O
O
O
O
O
O
O
O
OFF
X
O
X
O
O
X
O
O
•
BACKLIGHT
[OFF/BLC/WDR/ECL]
- BLC : Back light compensation
- WDR: Wide Dynamic Range Processing
- ECL : Eclipses. This masks off the brightest spot.
•
DAY/NIGHT
[AUTO/DAY/NIGHT]
- AUTO : Automatic Day/Night switching.
In AUTO Mode, a light level for switching can be selected. The
higher sensitivity level causes the switching at lower light level.
•
SENS-UP
[OFF/ X2~X128 Field]
Sets the maximum number of frame overlays at low light.
•
3D-DNR
[OFF/LOW/MIDDLE/HIGH]
Configures the 3D Digital Noise Reduction level.
•
IRIS LEVEL
[AUTO/ MANUAL(0~100)]
- In Auto Iris mode, the AE (Auto Exposure) is mainly controlled by
the Iris value, while the Shutter Speed is fixed. In Manual Iris Mode,
the Iris is fixed, and the AE is mainly controlled by other parameters.
•
GAIN LEVEL
[OFF/LOW/MID/HI]
When the image gets darker than a certain level, the signal’s gain
value increases to make it brighter.
•
SHUTTER SPEED
[OFF/AUTO/A-FLK/MANUAL(X128~1/90000sec)]
When the image gets darker than a certain level, the signal’s gain
value increases to make it brighter.
•
BRIGHTNESS
[0~100]
Sets the Image’s normal brightness level. The values for Iris, Shutter
Speed, and Gain will be based on this level.