CNB VZD207PLTP User Manual

Auto focus, Owner's manual, Wait

Advertising

Yellow

Black

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Explanation of two Symbols

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of un-insulated

"dangerous voltage" within the product's

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance-(servicing) instructions in the

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE
ON THE BOTTOM OF THE SYSTEM.

"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE"

enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

literature accompanying the appliance.

OWNER'S MANUAL

VANDAL PROOF DOME CAMERA

P/N : 3810-0049C

(Ver.0607E)

Color Dome Camera Series

AF Zoom Dome Camera Series

Auto Focus

Zoom Dome Camera

Auto Focus

Zoom Dome Camera

Design and specifications
are subject to
change without notice.

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

AF Zoom Dome

VANDAL PROOF CAMERA

Name and Functions

7. Remote Controller Operation

Receiver

Remote Control

Power
DC 12V, 500mA

RS-485 Signal

- White Terminal :
- Black Terminal :

① Camera Selection

- After camera connects with receiver,

firstly check camera I.D.

② Menu (PROG): Shows / Hides Menu.

Moves up and down items.

③ (TELE):
④ (WIDE):

- Press camera I.D. number(1~39 buttons)

on the top of wireless remote controller.

Caution :

Usually camera I.D. number

are selected from No.1 to No.39.

over I.D. No.40, you will have a use limit.

- Initial camera I.D. number is set up No.0

when it takes out of manufacturer's warehouse.

Example: ZOOM IN

I.D. No.5: Press 5 +<TELE>

I.D. No.15: Press <F1>+ 5 +<TELE>

I.D. No.24: Press <F2>+ 4 +<TELE>

I.D. No.34: Press <F3>+ 4 +<TELE>

Set data for the selected items.

⑤ (NEAR):
⑥ (FAR):

④

⑤

③

⑥

②

①

NEAR

FAR

FOCUS

WIDE

TELE

ZOOM

AUTO

SEQ

PAN

PROG

Option

2. UTP (Unshielded Twisted Pair)

The remote controller is optional item.

9. On-Screen Display

- 16x, 22x Series

8. Communication Protocol

10. Menu Format

- 16x, 22x Series

11. Menu Format Table

- 16x, 22x Series

. Contents

3. Camera Installation

Installation

1. Connecting to Monitor and Power

No.

#1
#2

Function

Video Output
Power Input

Remark

1.0 Vp-p

AC24V(20V~28V)orDC12V(11V~15V), Max 6W/ 0.5A

Terminal Color

Yellow

Green

No.

#1
#2

Function

Video Output
Power Input

Remark

1.0 Vp-p

DV12V(DC9V~15V), Max 5.4W/ 450mA

Terminal Color

Yellow

Red

- The wire is polarized.

- Use AC 24V power source or DC 12V power source.

- Connect the video out jack to the video in jack of monitor.

- Connect the power adapter to the power input connecter.

- Use DC 12V power source.

For AC 24V / DC 12V Power Type (Normal)

Connecting to Power

Connecting to Controller

Connecting to Monitor

For DC 12V Power Type

Cable Connection

Monitor

Remote Control

Receiver

Vandal Proof

Zoom Dome Camera

Signal (RS-485)

Built-in

Digital Zoom

192x Zoom

220x Zoom

260x Zoom

• Built-in Optical Power Zoom Lens

This camera with highly durable built-in zoom lens offers auto focus,

auto iris, and optical zoom functions enabling the user to monitor a

scene with clarity in any desired angle of view.

• High Resolution & Sensitivity SONY CCD

The chassis features a highly sensitive 1/4 inch CCD pick-up with

approximately 380,000(NTSC), 440,000(PAL) effective pixels

minimizing residual image and geometric distortion.

• Camera Rotation in Variable Angle

Camera assembly part is designed as round from, so it is easy to

rotate in variable angle. Don't mind the position of camera at the

time of installation.

• Remote Control through RS-485 (Pelco-D)

Remote control operations are possible though RS-485 interface for

focus and zoom control. In addition, the unit lets you command

white balance and exposure manually using RS-485 interface.

• Digital Slow Shutter for full color surveillance under very low

light condition : 0.001 Lux (at 128x Field)

• Excellent Interior Decoration

Dome body made by aluminum is resistant to impact.

Servicing

Do not attempt to disassemble or repair by yourself.
You may be exposed to dangerous voltage or other hazards.
Note that all servicing is qualified service personnel.
Modifications not approved by manufacturer could void the user's
authority to operate the equipment.

Power Sources

To prevent electric shocks and risk of hazards, do NOT use
more than the specified power source.

Install on an Unstable Place

Do not place or install this camera on an unstable place, stand,
tripod, bracket or table. That may cause serious injury to people
or damage appliance.

Environment

Do not install too warm or too cold place.
Recommended operation temperature is between -10˚C and 50˚C.

Heavy Shock and Vibration

Do not drop the dome camera or subject it to heavy shock of
vibration.

Note

When this camera is installed near equipment,
like a wireless communication device that emits a strong electro
magnetic field, some irregularity such as noise on the monitor
screen may happen.

Sunlight

Do not point the camera at the sun. CCD can be damaged.

Day & Night Model

• Day & Night Function : 0.1 Lux

Day & Night Model

16x Zoom (Optical: 16x, Digital: 12x)

22x Zoom (Optical: 22X, Digital: 10x)

26x Zoom (Optical: 26X, Digital: 10x)

1. Model Description

4. Composition

2. Precautions

3. Features

On-Screen Display

OSD

Upside

Downside

① Camera Assembly

② Camera Control Key

(Arrow Direction)

③ Housing Base

T :

W :

N :

F :

M :

V :

Tele(Zoom In)

Wide(Zoom Out)

Near(Focus Control)

Far(Focus Control)

Menu(Menu On)

Video Out Jack

⑦ Camera Control

(RS-485 Communication)
⑥ Power Input

(Be careful its polarity)

⑤ Composite Video Output BNC

⑧ Camera Control

Setup Key

⑨ Service Video

Out Jack

Video

(Yellow)

Power - DC 12V

(Red)

Video

(Yellow)

Power - AC 24V/ DC 12V

(Green)

Video Output

GND

Video Output

GND

- When using AC 24V power, it is possible to supply the power within 100m.

- Use 4 wires by 2 pair of wires.

- When using DC 12V power, UTP wire can not be used for power line.

- Connect UTP (Unshielded Twisted Pair) wire to the UTP output of the

camera directly.

UTP transmitter is included in the camera therefore additional UTP

transmitter is not necessary.
- UTP receiver is necessary to connect UTP wire to Monitor or DVR.
- When connecting UTP wire, make sure the polarity of the video signal.
- Use UTP wire "CAT5 24AWG" to have the best transmission quality.
- The twisted-pair output cannot be used at the same time as the Composite

Video output.

Yellow

Black

Monitor(or DVR)

300m(Max)

UTP Cable

UTP Receiver

AC 24V

Power Supply

100m(Max)

2 Wire

Yellow

Black

Receiver &

Remote Control

Pelco-D Keyboard

DVR System

RS-485

Power On

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x88

BYTE 4

0x00

BYTE 5

0x00

BYTE 6

0x00

BYTE 7

Checksum

Power Off

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x08

BYTE 4

0x00

BYTE 5

0x00

BYTE 6

0x00

BYTE 7

Checksum

Pelco D Stop

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x00

BYTE 4

0x00

BYTE 5

BYTE 6

BYTE 7

Checksum

Menu On / Off

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x40

BYTE 4

0x00

BYTE 5

0x00

BYTE 6

0x00

BYTE 7

Checksum

Focus Far

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x00

BYTE 4

0x80

BYTE 5

0x00

BYTE 6

0x00

BYTE 7

Checksum

Focus Near

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x01

BYTE 4

0x00

BYTE 5

0x00

BYTE 6

0x00

BYTE 7

Checksum

Zoom Wide

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x00

BYTE 4

0x40

BYTE 5

0x00

BYTE 6

0x00

BYTE 7

Checksum

Zoom Tele

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x00

BYTE 4

0x20

BYTE 5

0x00

BYTE 6

0x00

BYTE 7

Checksum

PELCO "D" Byte Format

Command Message

-RS-485,2400bps,1 Start bit,8 data bits,1 stop bit,no parity

Menu On / Off

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x00

BYTE 4

0x23

BYTE 5

0x00

BYTE 6

0x5F

BYTE 7

Checksum

Menu On / Off

Function

MSG

BYTE 1

0xFF

BYTE 2

CamID

BYTE 3

0x00

BYTE 4

0x03

BYTE 5

0x00

BYTE 6

0x62

BYTE 7

Checksum

Pelco Keyboard (95+ PATTERN)

V/D Keyboard (Set Preset + 98)

Don't care

Explanation of the On-Screen Display

The OSD (On Screen Display) is as follows:

X10000 ID 255

WAIT

X132

4. WBC(White Balance Control) Display
See Page 20.

6. Camera ID Display
See Page 20.

5. Shutter Speed
Use to select the shutter speed.

7. Wait Mode
Indicates the camera stand-by mode
until the camera power turns on.

8. Example of Zoom, Brightness,
Sharpness Display
See Page 20.

2. Mirror
When IMAGE MIRROR is ON state. The
image is displayed in the opposite direction.
The appear during the mirror mode.

1. Focus
The appear during the focus manual
mode.

3. Back light Display
In case the excessive light is behind the
center object, it is necessary to prevent
the center object from too much
darkness. Turn the BACK LIGHT ON,
then the center object is not influenced
by the back light.

FUNCTION

OSD Format

DESCRIPTION

Focus Mode

Mirror Mode

Back Light

WBC Mode

Shutter
Speed

Non display

Normal shutter (NTSC:1/60 PAL:1/50)
8 variable.

Wait Mode

Wait

Indicates the camera stand-by mode.
until the camera power turns ON.

8.1 Sharpness

Adjustment

Mode Display

8.2 Brightness

Adjustment

Mode Display

Zoom
Display

x16

Optical Zoom only mode

x32

Digital Zoom x 2 mode

x192

Digital Zoom x 12 mode

Camera ID

After input the identification number to each camera,
Multi-point control is available. (000~255)

Automatic focus mode

Manual focus mode

No screen inverted

Screen is inverted to the left or right

Back Light compensation off

Back Light compensation mode

White Balance AUTO

Push Auto White Balance: In this mode
"Menu key" pressed, the white point traced
automatically (PWB Auto Mode), "Menu Key"
released, the white point preserved currently
(PWB Manual Mode).

Non display

1 / 125
1 / 10000

x18

x10

SHP

/ W

MENU

Move up and down

using the TELE/

WIDE button.

1 BACKLIGHT
2 NEG / POS
3 COLOR
4 WB CONTROL
5 SHUTTER
6 CAMERA

OFF
POS
ON
AUTO
1/10000
123

MENU

7 ZOOM START

8 ZOOM STOP

9 BRIGHTNESS

10 SHARPNESS

11 FOCUS

12 PROTOCOL

13 INIT SET

END

192

AUTO

P/D

Can be changed

using the /

button.

1. General Model

MENU

1 BACKLIGHT
2 SLOW SHUTTER
3 DAY / NIGHT
4 WB CONTROL
5 SHUTTER
6 CAMERA

OFF
FLD24
OFF
AUTO
1/10000
123

MENU

7 ZOOM START

8 ZOOM STOP

9 BRIGHTNESS

10 SHARPNESS

11 FOCUS

12 PROTOCOL

13 INIT SET

END

192

AUTO

DEF

2. Day & Night Model

NAME

FUNCTION

BACKLIGHT

Use to select BLC mode.

OFFㅡㅡ>ON

NEG / POS

Use to change NEGATIVE and POSITIVE mode.

ON : NEGATIVE mode OFF : POSITIVE mode

SHUTTER

Use to select the shutter speed 8 steps.

NORMAL(NTSC:1/60, PAL:1/50),1/125,1/250,---,1/10000

ZOOM START

Use to change the zoom start position.

ZOOM STOP

Use to change the zoom stop position.

BRIGHTNESS

Use to change the brightness of scene (0~48).

10 SHARPNESS

Use to change the contour of scene (0~15).

11 FOCUS

AUTO : Set the focus mode to Auto mode.

PUSH AUTO : Set the focus mode to Push Auto mode.

12 PROTOCOL

DEF : Default

P / D : Pelco-D

13 INIT SET

Set the initial mode ON, the changed data are renewed.

Reset the data to its shipping condition.

CAMERA ID

To connect a large number of camera, identification

number can be assigned to each camera control easily.

(OFF, 1-255 : total number of ID is 256)

CAUTION : Set the ID number of camera, then

the ID number is displayed continuously.

COLOR

Use the change color and monochrome of picture.

ON : Color mode OFF : Black and White mode

WB CONTROL

AUTO : Maintain best color condition by controlling

the change of color automatically.

WB Range 2800˚K ~ 8000˚K

PUSH AUTO(PWB) : Can find White Balance exactly

in case precise WB maintenance

is needed under any environment.

--Turn the AUTO mode, WB acts automatically.

--Turn the PUSH AUTO mode, WB doesn't act.

: Day & Night Model

SLOW SHUTTER

Use under very low light condition for full color

surveillance.

OFFㅡㅡ>FLD2ㅡㅡ>ㅡㅡㅡ>FLD128

DAY & NIGHT

Use under low light condition for continuous

surveillance.

Autoㅡㅡ>ONㅡㅡ>OFF

AF Zoom Dome

VANDAL PROOF CAMERA

15. Specifications

- 26x Series

16. Troubleshooting

If there is no picture on the monitor screen,

make sure all the cables are properly connected.
make sure the monitor is properly adjusted.

DO NOT DISASSEMBLE THE CAMERA

IF ANY DEFECTIVE CAMERA HAS BEEN OPENED BEFORE IT

ARRIVES TO AUTHORIZED RMA OFFICE, THE DEFECTIVE CAMERA

MAY NOT BE REPAIRED UNDER IT'S WARRANTY SERVICE.

If the picture on the monitor screen is not clear,

clean the lens.
adjust the lens focus.

If there is a video noise or other unknown problems,

stop using the camera and call your local dealer.

14. Specifications

- 16x, 22x Series

Signal System

Signal System

Scanning System

Scanning Frequency(H)

Scanning Frequency(V)

Image Sensor

Effective Pixels Number

S/N Ratio

Resolution

Video Output Level

Lens

Digital Zoom Ratio

Min. Shooting Distance

Min. Illumination

Sync. System

OSD(On Screen Display)

Shutter Speed (8 Steps)

Input/ Output Connector

Power Consumption

(Option: AC24V/DC12V)

Dimensions

Weight

NTSC

PAL

525 Lines 625 Lines

2 : 1 Interlace

15.734 kHz 15.625 kHz

59.94 Hz 50Hz

1/4 inch SONY IT CCD

768(H) x 494(V)[Normal:510(H) x 492(V)] 752(H) x 582(V)[Normal:500(H) x 582(V)]

More than 48dB (AGC Off)

Horizontal : 480 TV Lines [Normal : 380 TV Lines]

1.0 Vp-p (75 Ohms, composite)

16x (F1.4, f=3.9~62.4mm)/ 22x (F1.6,f=3.9~85.8mm)

12x (Total Zoom Ratio: 192x)/ 10x (Total Zoom Ratio: 220x)

1 cm (Wide) / 1 meter (Tele)

1.0 Lux (30 IRE), 0.001 Lux (Day & Night Model)

Internal

On / Off

1/60 ~ 1/10,000 Sec. 1/50 ~ 1/10,000 Sec.

Control: 5 Pin Terminal, Power: 2 Pin Terminal, Video: BNC

DC 12V (DC 9V~15V), Max. 5.4W / 450mA

AC 24V (20V~28V) or DC 12V (11V~15V), Max 6W/ 0.5A

119.8mm (Dome Diameter) x 126.5 (Height)

Approx. 1600g

Model Description
Precautions
Features
Composition
Name and Functions
Installation
Remote Controller Operation
Communication Protocol

1.
2.
3.
4.
5.
6.
7.
8.

5
6
7
8
9

11
15
17

On-Screen Display
Menu Format
Menu Format Table
Specifications

10.
11.
14.

18
20
21
45

Troubleshooting

16.

1. AF Zoom

Dome Camera .................

2. Screw (4ea) .....................................................

3. Service Monitor Cable ....................................

4. L-Wrench ......................

5. Guide Pattern .................

6. Owner's Manual .........................

OWNER'S MANUAL

VANDAL PROOF DOME CAMERA

Auto Focus

Zoom Dome Camera

Auto Focus

Zoom Dome Camera

Built-in

192x Zoom

220x Zoom

Digital Zoom

260x Zoom

On-Screen Display

OSD

INFORMATION

This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct
the interference at their own expense.

WARNING

The manufacturer could void the user's authority to operate the
equipment.

CAUTION - To prevent electric shock and risk of fire hazards:

Do NOT use power sources except for that specified.
Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person
and should abide to all local codes.

⑨

⑧ Camera Control Key
Functions can be setup using 5 buttons
on the camera's housing base.

Tele (Zoom In)

Moves up and down on OSD menu

Wide (Zoom Out)

Moves up and down on OSD menu

Near (Focus Control)

Set data for the selected on OSD menu

Far (Focus Control)

Set data for the selected on OSD menu

Menu (Menu On/ Off)

Shows/Hides Menu

..........................................

Service Video Out Jack

Use for installation and service.

④ Dome Cover

① Stick the guide pattern on
the wall / ceiling.

② Drill four holes according
to the guide pattern then
insert anchors into the
drilled holes.

③ Draw out power / video
wires to the connecting
places.

④ Fix the housing base by
screws on the ceiling.

⑤ Adjust desired focus and
scene by turning and moving
the hemisphere by hand.

⑥ Put the dome cover over
the base.

⑦ Fix the dome cover on the
base by L-Wrench.

Ceiling

16 x

Series

22 x

Series

Type Digital

Zoom

Day &

Night

UTP

Power Input

DSS

Model

26 x

Series

Before operating the camera, confirm that you have the right
camera model and proper power voltage.
In order to help you understand this manual, we'll introduce
our model's description.

Thank you for purchasing this COLOR VIDEO CAMERA.

192 x
192 x
192 x
192 x
192 x
192 x
220 x
220 x
220 x
220 x
220 x
220 x
260 x
260 x
260 x

O
O
O
O

DC 12V
DC 12V

AC 24V / DC 12V
AC 24V / DC 12V

AC 240V / DC IN
AC 240V / DC IN

DC 12V
DC 12V

AC 24V / DC 12V
AC 24V / DC 12V

AC 240V / DC IN
AC 240V / DC IN

DC 12V

AC 24V / DC 12V
AC 24V / DC 12V

X
X
X
X

O
O

X
X
X
X

O
O

X
X

X
X
X

A
B
C
D
E

A
B
C

x z

ND": No Display

FUNCTION

OSD

EXPLANATION

White

Balance

Shutter

Speed

Motion

Detect

Initial

LOGO

Zone

Label

Pan / Tilt

Zoom

x125 ~

x10000
000 ~

255

...

Dx260

F.L

WAIT

Automatic color correction mode

Special color correction mode

Indoor mode

Outdoor mode

Temporary automatic mode

No Act Digital Panning / Tilting

Digital Panning / Tilting

Standard shutter speed (NTSC:1/60, PAL:1/50)

Flicker correction mode

Shutter speed indicator

Camera identification number

No motion detected

Motion detected

Displayed when POWER ON of the
camera is in operation

Explanation of the scene capture
by the camera (max. 10 letters)

Optical zoom: x1 ~ x26

Digital zoom: Dx27 ~ Dx260

* 'D' indicates digital zoom

SwB

IwB

OwB

PwB

Explanation of the On-Screen Display

The OSD (On Screen Display) is as follows:

X10000 255

WAIT

Dx260

Zone Label

12. On-Screen Display

- 26x Series

ND": No Display

FUNCTION

OSD

EXPLANATION

Focus

Mirror

Backlight

Automatic focus mode

Manual focus mode

No screen inverted

Screen is inverted to the left or right

Backlight compensation off

Backlight compensation mode

Automatic backlight compensation mode

13. Menus and Operations

- 26x Series

PAL

NTSC

Signal System

Scanning System
Effective Pixels No
Image Sensor
Resolution
Sync. System
S/N Ratio

Lens

Minimum Illumination
AGC
White Balance
Flickerless
Backlight Control
Day & Night Level Control
Video Output

Power Consumption
(Option: DC 12V)
Dimensions
Weight

2 : 1 Interlace

768(H) x 494(V) 752(H) x 582(V)

1/4 Inch SONY Super HAD CCD

480 TV lines

Internal

More than 48dB (AGC off)

26x Zoom Video AF

(F1.6(W), F3.8(T) f= 3.5~91.0mm)

Normal mode: Typical 1 Lux at 30IRE (AGC on)

Auto
Auto

On / Off Selectable

Volume Adjustment

VBS 1.0Vp-p 75Ω

AC 24V/DC 12V Model: AC 24V± 20%, DC 12V± 20%, 15W (Max)

DC 12V Model: DC 12V± 10%, 10W (Max)

119.8mm (Dome Diameter) x 126.5 (Height)

Approx. 1600g

16x, 22x

On-Screen Display
Menus and Operations
Specifications

12.
13.
15.

22
24
46

...................................

.............................................

..................................................

............................................

...............................

...............................................

.................

........................

..................................

...........................................

.................................

..........................................

......................................

..................................

...........................

..........................................

26x

2. Press the TELE/WIDE button.

3. Press the NEAR/FAR button.

4. Press the OSD MENU button at the main menu or sub-menu screen

to hide the menu.

It moves up and down the main menu category.
The sub-menu functions of the main menu category are displayed on the right.

It moves to the sub-menu window of the selected main menu.
The current set state of each sub-menu can be checked.
Press the TELE/WIDE button to move up and down the sub-menu category
and set each category by pressing the NEAR/FAR button.

It does not apply when the MENU button is used for other uses.
: 'Zone Label' setup screen

MENU

FOCUS MODE
PUSH AUTO
FOCAL DIST
ZOOM START
ZOOM END

GENERAL
FOCUS
AWB

D&N

BLC

MOTION

DISPLAY

INITIAL

EXIT

/ W

FOCUS

FOCUS MODE
PUSH AUTO
FOCAL DIST
ZOOM START
ZOOM END
INITIAL
EXIT

Can be changed

using the

Near/Far button.

MANUAL
OFF
1CM
x001
x260
OFF

Edits and displays the information of camera or explanation on the area of the
image being captured at the bottom left of the screen.
Maximum of 10 letters can be used/ edited.
It is described in detail on page 44.

2. LANGUAGE

Displays the currently set language.
Language can be set from ENG to KOR and vice versa using the NEAR/FAR button.

3. ZONE LABEL

4. COLOR

5. SHARPNESS

6. MIRROR

7. PROTOCOL

8. INITIAL

9. EXIT

Selects color or black and white mode.

Adjusts sharpness of outlines.
Can be set from 0 to 15.

P/D : Pelco-D

DEF : Default

Resets the current general settings category to the initial settings.

Inverts the screen to the right or left.

Closes the sub-menu and moves to the main menu.

Caution

Change the data of the sub-menu using the NEAR/FAR button.

Sets up the general operation of the camera.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- GENERAL

1. CAMERA ID

Displays the camera's ID.
Camera ID can be specified using numbers from 000 to 255 by using
the NEAR/FAR button.

GENERAL

CAMERA ID

LANGUAGE

ZONE LABEL

COLOR

SHARPNESS

MIRROR

PROTOCOL

INITIAL

EXIT

Can be changed

using the

Near/Far button.

001

ENG

EDIT

OFF

DEF

OFF

Move up and

down using the

TELE/WIDE button.

NEAR / FAR

/ F

MENU

CAMERA ID
LANGUAGE
ZONE LABEL
COLOR
SHARPNESS
MIRROR
PROTOCOL

GENERAL
FOCUS

AWB

D&N

BLC

MOTION

DISPLAY

INITIAL

EXIT

- DEF (Default)

- P/D (Pelco-D)

Minimum distance the camera can focus.
ex) 60 cm: Objects/subjects closer than 60 cm cannot be brought into focus.

2. PUSH AUTO

When temporary automatic focus is selected, the camera focuses
automatically when only the NEAR/FAR button is pressed.
In the Automatic Mode, it will be displayed as "Not Used".

3. FOCAL DIST

4. ZOOM START

5. ZOOM END

6. INITIAL

7. EXIT

Minimum zoom movement.
Possible from x 001 to x 260

Maximum zoom movement.
Possible from x 001 to x 260

Closes the sub-menu and moves to the main menu.

Initializes the changed category in focus menu.

Note) Automatic focus in manual mode is only possible when the location of the zoom
lens has changed or when the "temporary automatic focus" category is selected.
Automatic focus is also possible based on external AF command (1 shot AF).

Sets camera zoom and focus.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- FOCUS

1. FOCUS MODE

AUTO: Focuses automatically when changes are made to the screen.
MANUAL: User focuses manually.

/ F

MENU

FOCUS MODE
PUSH AUTO
FOCAL DIST
ZOOM START
ZOOM END

GENERAL
FOCUS
AWB

D&N

BLC

MOTION

DISPLAY

INITIAL

EXIT

FOCUS

FOCUS MODE
PUSH AUTO
FOCAL DIST
ZOOM START
ZOOM END
INITIAL
EXIT

MANUAL
OFF
50CM
x001
x260
OFF

5. INITIAL

6. EXIT

Closes the sub-menu and moves to the main menu.

Initializes the changed category in AWB menu.

1. AWB

AUTO : Automatically adjusts color according to the available lighting.
PUSH AUTO : Color will be automatically adjusted while the NEAR/FAR button
is pressed in the temporary automatic mode.
INDOOR : Set color temperature to be 3200°K.
OUTDOOR : Set color temperature to be 5400°K.
SPECIAL : Color can be corrected when the user increases or decreases
"Red Correction" or "Blue Correction".

2. RED CONT

Can be changed in special mode only, and R-Gain value is adjusted.
Can be set from 0 to 255.

3. BLUE CONT

Can be changed in special mode only, and B-Gain value is adjusted.
Can be set from 0 to 255.

4. PUSH AUTO

Can be used in temporary automatic mode only.
Color will be automatically adjusted while the NEAR/FAR button is pressed at
temporary automatic mode. (the word "Pressed" will be displayed.)

Adjusts picture color.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- AWB

AWB

WB MODE
RED CONT
BLUE CONT
PUSH AUTO
INITIAL
EXIT

AUTO
NOT USED
NOT USED
NOT USED
OFF

/ F

MENU

WB MODE
RED CONT
BLUE CONT
PUSH AUTO

GENERAL

FOCUS
AWB
AE

D&N

BLC

MOTION

DISPLAY

INITIAL

EXIT

2. BRIGHTNESS

Brightness can be adjusted from 0 (dark) to 48 (bright).
Can be used while in manual mode.

4. SHUTTER SPD

Can be changed while in manual and shutter manual mode.
Shutter speed can be changed from standard to 1/10000.
Standard shutter speed: NTSC- 1/60, PAL- 1/50.

5. IRIS ADJUST

Adjusts the opening of iris.
Can be adjusted from 0 (closed) to 255 (opened).
Change in screen can be recognized only within the certain range.
Can be adjusted while in manual and gain adjustment mode.

6. AGC ADJUST

Gain adjustment of image signal.
Can be adjusted from 0 to 255.
Can be adjusted while in manual and gain adjustment mode.

3. FLICKERLESS

Removes screen flickering caused by discordance of frequency and lighting.

7. AGC MAX SET

Maximum gain value used when gain is automatic.
Can be adjusted from 0 to 255.

8. INITIAL

Initializes the changed category in exposure menu to the initial settings.

9. EXIT

Closes the sub-menu and moves to the main menu.

1. AE MODE

AUTO : Automatically adjusts brightness according to the available lighting.
MANUAL : Manually adjusts all brightness.
AGC MAN : Allows you to adjust gain.
IRIS MAN : Allows you to adjust iris.
SHUT MAN : Allows you to adjust the shutter speed.

Adjusts picture brightness.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- AE

AE MODE

BRIGHTNESS

FLICKERLESS

SHUTTER SPD

IRIS ADJUST

AGC ADJUST

AGC MAX SET

INITIAL

EXIT

AUTO

OFF

NOT USED

213

OFF

/ F

MENU

AE MODE
BRIGHTNESS
FLICKERLESS
SHUTTER SPD
IRIS ADJUST
AGC ADJUST
AGC MAX SET

GENERAL

FOCUS

AWB
AE
D&N

BLC

MOTION

DISPLAY

INITIAL

EXIT

Determines and operates in mode suitable for day or night.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- D & N

1. D&N MODE

AUTO : Filter operates automatically according to brightness.
NIGHT : Manual Mode- removes IR cut filter.
DAY : Manual Mode- does not remove IR cut filter.

/ F

MENU

D&N MODE
BRT LEVEL
FILTER DLY
IR LED
D&N CDS/AE

GENERAL

FOCUS

AWB

AE
D&N
BLC

MOTION

DISPLAY

INITIAL

EXIT

D&N

D&N MODE
BRT LEVEL
FILTER DLY
IR LED
D&N CDS/AE
INITIAL
EXIT

- CDS

- AE

AUTO
48
10 SEC
SET
CDS
OFF

3. FILTER DLY

Sets conversion time of IR cut filter while in automatic mode.
Time can be adjusted from 0 to 60 seconds.

2. BRT LEVEL

Sets brightness that determines the opening/closing or IR cut filter while in
Automatic Mode.
Screen brightness can be adjusted
• CDS: 1 (bright) to 170 (dark) Default: 48 (20 Lux)
• AE: 1 (bright) to 118 (dark) Default: 90 (20 Lux)
Please set up the level higher when you install this camera into the housing.

4. IR LED

Determines whether IR LED light will be on/off at night.
• SET: uses built-in IR LED in night state
• UNSET: does not use built-in IR LED in night state

5. INITIAL

Initializes the changed category in Day/Night Menu.

6. EXIT

Closes the sub-menu and moves to the main menu.

•

While IR LED is on mode make sure to select D&N CDS/AE to „CDS ”.

⇒

Note) BLC (Backlight Correction): Function that sharpens subjects only.

1. BLC MODE

Sharpens subjects with backlight.
OFF : Backlight Correction function is disabled.
ON : Backlight Correction function is enabled.
AUTO : Backlight Correction function is enabled automatically.

2. BLC LEVEL

Sets sensitivity to backlight.
Can be adjusted from 0 to 40.

3. INITIAL

Initializes the changed category in backlight menu.

4. EXIT

Closes the sub-menu and moves to the main menu.

Caution

It may not function properly when shutter speed is not 'standard'.

Function that sharpens outlines of subjects and background when
there is strong backlight.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- BLC

BLC

BACK LIGHT
BLC LEVEL
INITIAL
EXIT

OFF
16
OFF

MENU

/ F

BACK LIGHT
BLC LEVEL

GENERAL

FOCUS

AWB

D&N
BLC
MOTION

DISPLAY

INITIAL

EXIT

1. DETECT MODE

Enables or disables motion detection function.

2. DETECT AREA

Sets motion detection field.
Can be set to UPPER, LOWER, RIGHT, LEFT, CENTER and WHOLE.

When there is movement of the subject in the screen, there will be an
alarm, or the user will be informed through communications or "MD"
will display on the screen.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- MOTION

Note) There is a signal every time there is movement by the subject. If motion is
detected, MD (Motion Detected) is displayed on the upper left of the screen.
This message enables the user to set On-screen display state in the menu.

Note) The detection field on screen is as follows:

3. SENSITIVITY

Sets sensitivity to detect movement.
Can be set from 1 (low response) to 15 (sensitive).

5. INITIAL

Initializes the changed category in motion detection menu.

6. EXIT

Closes the sub-menu and moves to the main menu.

4. OUTPUT MODE (For RS-422 Model)

Informs detection when motion has been detected.
ALARM : Sends alarm using the output line connected to outside.
COMM : Communication packet is transmitted when motion is detected.
ALARM/COMM : Uses communications packet and external output line
simultaneously.

Caution

Error can occur in the motion detection function in the following cases.
(1) When lighting is unsteady.
(2) When light changes often even though there is no movement of the subject.

It is recommended that this function should be used after setting the detection
sensitivity and detection field after monitoring the environment for an extended time.

CENTER

LOWER

UPPER

WHOLE

LEFT

RIGHT

MENU

/ F

DETECT MODE
DETECT AREA
SENSITIVITY
OUTPUT MODE

GENERAL

FOCUS

AWB

D&N

BLC
MOTION
DISPLAY

INITIAL

EXIT

MOTION

DETECT MODE
DETECT AREA
SENSITIVITY
OUTPUT MODE
INITIAL
EXIT

OFF
WHOLE
8
ALARM/COMM
OFF

Note) Refer to the "On-Screen Display" for details.

1. WHOLE OSD

All on-screen display is "ON" or "OFF".
Nothing will be displayed if specified as "Hidden" even when other categories
are individually set as "ON". (Exception: Initial logo when power is turned on.)

5. ZOOM MAG

Displays zoom on lower right of the screen.
The number in Dx260 shows the magnification, and D represents digital zoom.

2. FUNC OSD

Images displayed on the upper area of the screen.
Refer to the "On-Screen Display" section- images 1 to 6.

3. MOTION DET

"MD" is displayed on the upper left of the screen when motion is detected.

4. CAMERA ID

Displays ID number on the upper right of the screen.

6. ZONE LABEL

Displays texts explaining screen area on the lower left of the screen.

7. VERSION

Displays the version information of camera (cannot be changed).

8. INITIAL

Initializes the changed category in On-screen display menu.

9. EXIT

Closes the sub-menu and moves to the main menu.

Specity what to display on the screen.
Press the NEAR/FAR button to move to the sub-menu.

Main Menu- DISPLAY

DISPLAY

WHOLE OSD

FUNC OSD

MOTION DET

CAMERA ID

ZOOM MAG

ZONE LABEL

VERSION

INITIAL

EXIT

VER 2.1

OFF

MENU

/ F

WHOLE OSD
FUNC OSD
MOTION DET
CAMERA ID
ZOOM MAG
ZONE LABEL
VERSION

GENERAL

FOCUS

AWB

D&N

BLC

MOTION
DISPLAY
INITIAL

EXIT

Closes menu.
Press the NEAR/FAR button to close menu.

Main Menu- EXIT

Caution

Please use caution when performing this function.
Every setting(even in all sub-menus)will be initialized.
Initialization in sub-menus will initialize each category of the sub-menu only.

Initializes all current settings.
No sub-menu.
Press the NEAR/FAR button to initialize the entire camera settings.
Note that all settings in the sub-menus will be initialized.

OFF STATE : Indicates that settings are not initialized.
ON STATE : Indicates that camera settings have been initialized.

Main Menu- INITIAL

MENU

/ F

OFF STATE

ON STATE

GENERAL

FOCUS

AWB

D&N

BLC

MOTION

DISPLAY

INITIAL
EXIT

GENERAL

FOCUS

AWB

D&N

BLC

MOTION

DISPLAY

INITIAL
EXIT

MENU

GENERAL

FOCUS

AWB

D&N

BLC

MOTION

DISPLAY

INITIAL
EXIT

How to Set Up Functions

Functions can be setup using 5 buttons on the camera's rear panel.

MENU Key : Shows/Hides Menu
TELE/WIDE : Moves up and down items
NEAR/FAR : Set data for the selected item

1. Press the MENU button.

The Menu consists of the „Main Menu” and „Sub Menu”.
The main menu is displayed where 10 camera functions can be selected.
To the right of each main menu selection, the sub-menu is displayed.

(*) The above keys may be used differently
in some functions : 'Zone Label'

: This blinks to show that this category has been selected.

GENERAL

TELE

WIDE

NEAR

FAR

MENU

NEAR / FAR

/ W

MENU

CAMERA ID
LANGUAGE
ZONE LABEL
COLOR
SHARPNESS
MIRROR
PROTOCOL

GENERAL
FOCUS

AWB

D&N

BLC

MOTION

DISPLAY

INITIAL

EXIT

Caution) : denotes a blank letter and will be displayed as a blank space on the
actual screen.

1. You can choose up to 84 symbols from the available symbols table.

2. Select the location of letters using the TELE/WIDE button.
A downward arrow will blink on top of the letter to edit.

3. Select letters using the NEAR/FAR button.

4. To exit, press the MENU.

ZONE LABEL

FRONT DOOR

TE/WI - POSITION

NE/FA - CHAR SELECT

MENU - EXIT

Max. 10

Letter

User can edit explanation or condition of camera, and this will be
displayed on the lower left screen.

ZONE LABEL

)

(

;

: Space

“

Advertising

This manual is related to the following products:

VZD207NLTP, VZD127PLTP, VZD127NLTP, VZD207PL, VZD207NL, VZD127PL, VZD127NL

Popular Brands

Popular manuals