Acer FotoPrisa 300P - Manual (Page 48)

40
FotoPrisa
1. Get the right image
If you are using a digital still camera
It’s better to choose the camera with aspects ratio of 4:3, like
640 x 480 (minimum requirements bigger than 600 x 450),
800 x 600, 1024 x 768…, etc.
Then download to the PC to save as appropriate file in the
image-editing program (such as Photo Express). If the aspect
ratio is not exactly 4:3, use to the Crop function to remove
the longer side as to fit the ration of 3 to 4.
If you are using a scanner (you already have a 2” x 1.5”
photo on hand)
Select only the part of the whole ID photo and do the scanning
at 300dpi. Of course, the real ID photo usually has an aspect
ratio slightly deviated from 4:3.
To adopt the scanned image within the range of 2” x 1.5”,
adjust the dimension of the relatively longer side (compared to
the standard ratio 4:3) to either 2” or 1.5” by fixing the
resolution at 300dpi. Then we got a similar dimension of image
for the ID photo printout.
2. Arrange the 6 tiled ID photos on one photo paper
If the “Tile” function is available like in the options of Print in
Photo Express, just choose “Landscape” as orientation and set 2
Rows and 3 columns, then click “Print”. It’s so easy to
make 6 ID photos!
If in other programs, please open a new image file of
1250 pixels x 1500 pixels, same as the maximum print
area. Then use Copy and Paste functions to make a
new image with 6 ID photos just like shown in the
illustrative figure. Then save it to your album! And from
that on every time you need to develop new ID photos,
just load the file and print, then it’s done!
B
A
A : B = 4 : 3