CNB GS3760PF User Manual

Menu, Class 2 only menu power video dc video out, Menu power video out

Advertising

Digital Color Camera Series

P/N : 3810-0138B

(Ver.0806E)

Color Video Camera Series

Design and specifications are subject to
change without notice.

COLOR VIDEO CAMERA

Color CCD

COLOR VIDEO CAMERA

Color CCD

OWNER'S MANUAL

DIGITAL CAMERA SERIES

COLOR VIDEO CAMERA

On-Screen Display

OSD

DSP

Digital

DC 12V

Class 2 Only

MENU

POWER

VIDEO

VIDEO OUT

Class 2 Only

MENU

POWER

VIDEO

VIDEO OUT

24VAC

UTP OUT

DC 12V

Class 2 Only

MENU

POWER

VIDEO

VIDEO OUT

INFORMATION
This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.

WARNING

The manufacturer could void the user's authority to operate the equipment.

CAUTION - To prevent electric shock and risk of fire hazards:

Do NOT use power sources except for that specified.
Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should abide to all local codes.

CAUTION! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Explanation of two Symbols

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of un-insulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance-

(servicing) instructions in the literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM.

"WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE"

. User Information

1. SAFETY INSTRUCTIONS

2. PRECAUTIONS

3. FEATURES

4. NAME AND FUNCTIONS

5. OPERATING CAMERA

6. INSTALLATION (LENS)

7. CONNECTIONS

8. COMPOSITION

9. SPECIFICATIONS

.............

............................

..................................

.............

.................
.................

...........................

........................

.........

46
48
50
52
54

.........
.........

...........
...........
...........

Before using this camera, please read this operation manual carefully to obtain
the best result and keep this manual for future reference.

Thank you for purchasing this COLOR VIDEO CAMERA.

. 24VAC/12VDC Input Model
. 100VAC-240VAC Input Model

. 12VDC Input Model

. Contents

Handling

Do not disassemble the camera and never touch
parts inside the camera.

Be sure the ambient temperature is less than
40℃ in installation intended for long term
continuous operation.

Avoid installing in a humid or dusty place.

Avoid installing in places where there are
strong magnetic fields and electric signals.

Avoid installing in places where the camera
would be subject to strong vibrations.

Never expose the camera to rain and water.

Installation and storage

Do not point the camera at the sun. This could
damage the camera whether it is operating or not.

Do not install the camera where the temperature
could exceed the allowable range.

Do not drop the camera or subject it to shocks
and vibrations to avoid possible damage.

When attaching or removing the lens, handle
with care in order to that moisture and dust do
not enter the camera.

2. PRECAUTIONS

Read Instructions
Read all of the safety and operating instructions
before using the product.

Installation
Do not place this product on an unstable cart, stand,
or table. The product may fall causing serious injury
to a child or adult, and damage to the product.
Use only with a cart or stand recommended by the
manufacturer, or sold with the product.
Mounting should follow the manufacturer's instructions,
and should use a mounting accessory recommended
by manufacturer.

Power source
This product should be operated only from the type
of power source indicated on the marking label.
If you are not sure of the type of power supplied to
your home, consult your dealer or local power
company.

Retain Instructions
Save this instructions for later use.

Cleaning
Unplug this appliance from wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

Water and Moisture.
Do not use this product near water or moisture.
(For example. near a bathtub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool,etc)

1. SAFETY INSTRUCTIONS

............................

......................................................

. Lens Connector Plug

(E-4-191J-100)

. Lens Mount Cap

. C-mount Adapter

. Owner's Manual

Design and specifications are subject to change without notice.

This color video camera is designed to output video signals conforming
to the NTSC(PAL) standard. So that it cannot be used with video recorder
or color monitors which use color systems other than NTSC(PAL).

The lens mount cap and C-mount adapter are attached when supplied.

8. COMPOSITION

7. CONNECTIONS

WITH A ZOOM LENS
1) Fully open the aperture and set the lens to the maximum tele-photo position. Then turn the focus ring to focus.
In the case of an auto-iris lens only, shoot a comparatively dark object so that the aperture is fully open.
2) Set the lens to its maximum wide-angle position.
3) Loosen the two back-focus screws with a screw driver(L-wrench), and turn the lens mount to focus.
4) After adjusting the back-focus, tighten the back-focus screw.
5) Repeat step 1)~3) until the difference between focusing position 1) and 2)becomes smallest.

CAUTION : Do not forcibly turn back-focus screw, it could cause damage to the camera.

When a lens is mounted, adjustment of the back-focus may sometimes be required.
Adjust the lens focus ring when the correct focus cannot be obtained.

WITH A FIXED-FOCUS LENS
1) Fully open the aperture and set the focus ring to "∞"(infinity).
In the case of an auto-iris lens only, shoot a comparatively dark object so that the aperture is fully open.
2) Loosen the two back-focus screws with a screw driver(L-wrench), and turn the lens mount to focus.
3) After adjusting the back-focus, tighten the back-focus screw.

Back-focus Adjustment

Remove the lens mount cap from the camera.

Please insert a lens cable when using the DC iris lens or Video iris lens.

Lens select switch on the rear pannel should be set to DC or VIDEO position

when using the AUTO iris lens.

When using the VIDEO type lens, please adjust a brightness of image

with volume attached with the lens.

When using the DC type lens, please adjust a brightness of image by

setup menu on the rear panel. (see p.16)

Attach or remove the C-mount adapter depending on the lens to be used.

Attach the lens to the lens mount. Secure it so that it does not become loose.

If the lens has an auto-iris mechanism, connect the lens cable to the lens connector.

- When installing a video-iris lens, lens switch should be set to VIDEO position.
- When installing a galvanometric-iris lens, lens switch should be set to DC position.

- If the adapter is attached so tightly that it is difficult to remove it.
(Keep the C-mount adapter for possible future use.)

- When using DC AUTO IRIS LENS: Select DC in LENS SETUP under OSD
menu, and place LENS SELECTION SWITCH at
DC in the REAR PANEL

- When using VIDEO AUTO IRIS LENS: Select VIDEO
in LENS SETUP under OSD menu, and place
LENS SELECTION SWITCH at VIDEO in the
REAR PANEL

- 100VAC - 240VAC TYPE doesn't provide VIDEO IRIS LENS option

Mounting a Lens

Video Type lens : Set lens Switch to Video. Connect the lens cable of a video Type lens.
If the plug on the cable is a different type, replace it with the provided 4-pin iris plug.

DC type lens : Set lens switch to DC. Connect the lens cable of a DC(Galvanometric) type lens.
If the plug on the cable is a different type, replace it with the provided 4-pin iris plug.

Pin Assignment :

Pin No.

#1
#2
#3
#4

Signal

+9V DC

N.C

Video(1.0Vp-p, high impedance, no sync)

GND

VIDEO Iris Type Lens

Pin No.

#1
#2
#3
#4

Signal
Damping coil (-)
Damping coil (+)
Drive coil (+)
Drive coil (-)

DC Iris Type Lens

When using an auto-iris lens, install the accessory lens plug
on the lens cable as follows.

NOTE

After installing the connector plug, connect it to

the lens connector on the left side of camera.

Lens Connector

4. NAME AND FUNCTIONS

Holder Screw Hole

Used to install the camera on an optional

holder.(Tripod or Bracket)

The optional holder must be equipped with

the screw specified as shown right.

CS-Mount Holding Screw

Used to readjust back focus of the camera.

There are two back focus lock screws.

These must be loosened before the camera

may be back focused.

Loosen the lock screws to turn the CS-mount

lens adaptor, and tighten the lock

screws after adjustment.

Auto Iris Lens Connector

Used to connect Auto Iris Lens plug.

C-Mount Lens Adapter

Used to attach C-mount lens.
CS-Mount Lens Adapter

Used to attach CS-mount lens.

1/4"- 20 UNC (20 THREAD)

L : 4.5mm±0.2mm (ISO standard),

or 0.197" (ASA standard)

② Lens Selection Switch

Used to choose DC or VIDEO according to the type of your Lens.
③ POWER Input Terminal

Used to connect a 12VDC power source.

Used to connect an 24VAC or 12VDC power source.

Used to connect an 100VAC~240VAC power source.

⑤ Power Indicate LED

④ VIDEO OUT Jack

Used to connect an external video monitor in jack.

⑥ UTP Video Output Terminal

These terminals provide a composite video output signal which may be transmitted over

a twisted-pair connection to furnished with a suitable receiver.

① Function Setup Button

Functions can be setup using 5 buttons on the camera's rear panel.

MENU Buttons : Used to access menu mode.

Also used to escape menu mode.
UP / DOWN Buttons : Used to choose the desired

menu item. It also moves the cursor up or down in

the menu screen.
LEFT/RIGHT Buttons: Used to change the parameter

of the selected menu item. It also moves the cursor

the left of right in the menu screen.

MENU

6. INSTALLATION

(LENS)

High Sensitivity 1/3 Inch Sony Super HAD CCD

Min. Illumination (F1.2, 30 IRE) : 0.1Lux (Color)
0.05Lux (BW, ICR)

OSD (On Screen Display)

High Performance Menus For Functions

Day & Night (Programmable or ICR)

• Privacy Zone Selectable (4 Programmable Zone)
• Motion Detection Selectable (64 Programmable Zone)
• Sharpness Enhanced Adjustable
• Flickerless Selectable
• Gamma Enhanced Selectable
• BLC Zone Selectable (64 Programmable Zone)

3. FEATURES

① Function

Setup Button

④ Video Out Jack

② Lens Selection

Swicth

⑤ Power Indicate LED

③ Power Input

Terminal

12VDC Input Model

Class 2 Only

MENU

POWER

VIDEO

VIDEO OUT

24VAC / 12VDC Input Model

① Function

Setup Button

④ Video Out Jack

② Lens Selection

Swicth

⑤ Power Indicate LED

⑥ UTP Video

Output Terminal

UTP Transmission Model

MENU

POWER

VIDEO OUT

100VAC~240VAC Input Model

5. OPERATING CAMERA

CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION

ADJUST

LANGUAGE
RESET
EXIT

• ON • OFF
• MANUAL • VIDEO • DC
• AUTO • FLK • FIXED • MANUAL
• ATW • AWB • FIXED • MANUAL
• BLC • AGC • DAY NIGHT • PRIVACY
• MIRROR • GAMMA • MOTION
• CONTRAST • SHARPNESS
• CB_GAIN • CR_GAIN
• ENGLISH • KOREAN • CHINESE1 • CHINESE2 • JAPANESE

SETUP MENU

- DOWN Button
- UP Button
- LEFT Button
- RIGHT Button
- MENU(SET) Button

Use five buttons on rear side of the camera.

SETUP
- Press and hold MENU button 1 second to access
the setup mode.

• Select the status using the ◀, ▶, ▲, ▼ button.

• ↙ Press MENU button on OSD to enter sub menu.

Setting up the Menu

SETUP

CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT

OFF
MANUAL
AUTO ↙

ATW
↙
↙

ENGLISH
↙

1. Press MENU button, then SETUP mode is activated.
• MAIN SETUP menu is displayed on the monitor.

3. Set details using LEFT, RIGHT button.

2. Select OSD item using UP, DOWN button.

4. Select "Exit" and then press the MENU button
to finish the SETUP (Save and Exit)

Main Menu -

SETUP

Main Menu -

CAMERA ID

1) CAMERA ID setup (default setting OFF)

① Press MENU key in ON ↙ state.

(Access ID setting MODE)

② Press MENU key in CAMERA ID.

2) POSITION setup. Press POSITION ↙.

① Move the character using UP, DOWN, LEFT, RIGHT button.

② Press Menu button to confirm selection of the character.

③ Press Return to go to previous screen. ID is displayed by pressing EXIT on MAIN MENU.

③ Character is changed each time UP, DOWN is

pressed. (Can select up to 63 letters)

④ Press MENU button in ↙ to

exit from ID setup mode

⑤ Press MENU button in 'C' to correct and erase

the chosen entry.

Main Menu -

ADJUST

Main Menu -

RESET

Menu [FUNCTION] -

MOTION AREA 2

Main Menu -

LANGUAGE

NTSC PAL NTSC PAL

2:1 Interlace Transfer 1/3 Inch Super HAD CCD

768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)

Composite: 1.0Vp-p, 75Ω, Unbalanced

Internal Sync

More than 50dB (AGC OFF)

530 TV Lines 380 TV Lines

0.3 Lux (30IRE, AGC ON) 0.1 Lux (30IRE, AGC ON)

C/CS Mount

Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /

FLK / Fixed / Manual (Level Adjustable)

ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual

Manual / DC (Level Adjustable) / VIDEO

ON / OFF

Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter

White Balance
Lens
Camera ID

High Resolution

Normal Resolution

MODEL

9. SPECIFICATIONS

English / Korean / Chinese 1 / Chinese 2 / Japanese

ON / OFF (Level Adjustable)

BW / Color / Auto

ON / OFF (4 Programmable Zone)

ON / OFF (Horizontal)

User / 0.5 ~ 1.0 Adjustable

ON / OFF (64 Programmable Zone)

0 ~ 255 (Level Adjustable)

0 ~ 31 (Level Adjustable)

DC Iris / Video Iris / Manual Lens

12VDC (±20%)

100mA / 1.3W (Max)

-10℃~+50℃ (Recommendation: -5℃~+40℃)

-20℃~+60℃

Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Operating Temperature
Storage Temperature

12VDC Input Model

NTSC PAL NTSC PAL

2:1 Interlace Transfer 1/3 Inch Super HAD CCD

768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)

Composite: 1.0Vp-p, 75Ω, Unbalanced

Internal Sync

More than 50dB (AGC OFF)

530 TV Lines 380 TV Lines

0.3 Lux (30IRE, AGC ON) 0.1 Lux (30IRE, AGC ON)

C/CS Mount

Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /

FLK / Fixed / Manual (Level Adjustable)

ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual

Manual / DC (Level Adjustable) / VIDEO

ON / OFF

Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter

White Balance
Lens
Camera ID

High Resolution

Normal Resolution

MODEL

9. SPECIFICATIONS

English / Korean / Chinese 1 / Chinese 2 / Japanese

ON / OFF (Level Adjustable)

BW / Color / Auto

ON / OFF (4 Programmable Zone)

ON / OFF (Horizontal)

User / 0.5 ~ 1.0 Adjustable

ON / OFF (64 Programmable Zone)

0 ~ 255 (Level Adjustable)

0 ~ 31 (Level Adjustable)

DC Iris / Video Iris / Manual Lens

24VAC (20V ~ 28V) or 12VDC (10V ~ 15V)

140mA / 1.6W (Max)

Power / Video / UTP (Option)

-10℃~+50℃ (Recommendation:-5℃~+40℃)

Language
Back Light Compensation
Auto Gain Control
Day & Night
Privacy
Mirror
Gamma
Motion Detection
Contrast
Sharpness
Applicable Lens
Supply Voltage
Power Consumption
Input/ Output Connector
Operating Temperature

NTSC PAL NTSC PAL

2:1 Interlace Transfer 1/3 Inch Super HAD CCD

768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)

Composite: 1.0Vp-p, 75Ω, Unbalanced

Internal Sync

More than 50dB (AGC OFF)

530 TV Lines 380 TV Lines

0.3 Lux (30IRE, AGC ON) 0.1 Lux (30IRE, AGC ON)

C/CS Mount

Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /

FLK / Fixed / Manual (Level Adjustable)

ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual

Manual / DC (Level Adjustable) / VIDEO

ON / OFF

Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter

White Balance
Lens
Camera ID

High Resolution

Normal Resolution

MODEL

9. SPECIFICATIONS

English / Korean / Chinese 1 / Chinese 2 / Japanese

ON / OFF (Level Adjustable)

BW / Color / Auto

ON / OFF (4 Programmable Zone)

ON / OFF (Horizontal)

User / 0.5 ~ 1.0 Adjustable

ON / OFF (64 Programmable Zone)

0 ~ 255 (Level Adjustable)

0 ~ 31 (Level Adjustable)

DC Iris / Manual Lens

100VAC - 240VAC

2.5W (Max)

-10℃~+50℃ (Recommendation: -5℃~+40℃)

-20℃~+60℃

100VAC - 240VAC Input Model

NTSC PAL NTSC PAL

2:1 Interlace Transfer 1/3 Inch Super HAD CCD

768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)

Composite: 1.0Vp-p, 75Ω, Unbalanced

Internal Sync

More than 50dB (AGC OFF)

530 TV Lines 380 TV Lines

0.3Lux(30IRE, AGC ON) 0.08Lux(BW,ICR) 0.1Lux(30IRE, AGC ON) 0.05Lux(BW,ICR)

C/CS Mount

Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /

FLK / Fixed / Manual (Level Adjustable)

ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual

Manual / DC (Level Adjustable) / VIDEO

ON / OFF

Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter

White Balance
Lens
Camera ID

High Resolution

Normal Resolution

MODEL

9. SPECIFICATIONS

English / Korean / Chinese 1 / Chinese 2 / Japanese

ON / OFF (Level Adjustable)

BW / Color / Auto (ICR)

ON / OFF (4 Programmable Zone)

ON / OFF (Horizontal)

User / 0.5 ~ 1.0 Adjustable

ON / OFF (64 Programmable Zone)

0 ~ 255 (Level Adjustable)

0 ~ 31 (Level Adjustable)

DC Iris / Video Iris / Manual Lens

12VDC (±20%)

140mA / 1.7W (Max)

-10℃~+50℃ (Recommendation: -5℃~+40℃)

-20℃~+60℃

NTSC PAL NTSC PAL

2:1 Interlace Transfer 1/3 Inch Super HAD CCD

768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)

Composite: 1.0Vp-p, 75Ω, Unbalanced

Internal Sync

More than 50dB (AGC OFF)

530 TV Lines 380 TV Lines

0.3Lux(30IRE, AGC ON) 0.08Lux(BW,ICR) 0.1Lux(30IRE, AGC ON) 0.05Lux(BW,ICR)

C/CS Mount

Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /

FLK / Fixed / Manual (Level Adjustable)

ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual

Manual / DC (Level Adjustable) / VIDEO

ON / OFF

Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter

White Balance
Lens
Camera ID

High Resolution

Normal Resolution

MODEL

9. SPECIFICATIONS

English / Korean / Chinese 1 / Chinese 2 / Japanese

ON / OFF (Level Adjustable)

BW / Color / Auto (ICR)

ON / OFF (4 Programmable Zone)

ON / OFF (Horizontal)

User / 0.5 ~ 1.0 Adjustable

ON / OFF (64 Programmable Zone)

0 ~ 255 (Level Adjustable)

0 ~ 31 (Level Adjustable)

DC Iris / Video Iris / Manual Lens

24VAC (20V ~ 28V) or 12VDC (10V ~ 15V)

240mA / 2.6W (Max)

Power / Video / UTP (Option)

-10℃~+50℃ (Recommendation: -5℃~+40℃)

NTSC PAL NTSC PAL

2:1 Interlace Transfer 1/3 Inch Super HAD CCD

768(H) x 494(V) 752(H) x 582(V) 510(H) x 492(V) 500(H) x 582(V)

Composite: 1.0Vp-p, 75Ω, Unbalanced

Internal Sync

More than 50dB (AGC OFF)

530 TV Lines 380 TV Lines

0.3Lux(30IRE, AGC ON) 0.08Lux(BW,ICR) 0.1Lux(30IRE, AGC ON) 0.05Lux(BW,ICR)

C/CS Mount

Auto ([NTSC:1/60~1/100,000] [PAL:1/50~100,000]) /

FLK / Fixed / Manual (Level Adjustable)

ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual

Manual / DC (Level Adjustable) / VIDEO

ON / OFF

Signal System
Image Sensor
Effective Pixels
Video Output
Sync. System
Luminance S/N Ratio
Horizontal Resolution
Min. Illumination (F1.2)
Lens Mount
Electronic Shutter

White Balance
Lens
Camera ID

High Resolution

Normal Resolution

MODEL

9. SPECIFICATIONS

English / Korean / Chinese 1 / Chinese 2 / Japanese

ON / OFF (Level Adjustable)

BW / Color / Auto (ICR)

ON / OFF (4 Programmable Zone)

ON / OFF (Horizontal)

User / 0.5 ~ 1.0 Adjustable

ON / OFF (64 Programmable Zone)

0 ~ 255 (Level Adjustable)

0 ~ 31 (Level Adjustable)

DC Iris / Manual Lens

100VAC - 240VAC

3.0W (Max)

-10℃~+50℃ (Recommendation: -5℃~+40℃)

-20℃~+60℃

100VAC - 240VAC Input Model

Each LEVEL value can be

adjusted using LEFT, RIGHT button.

SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT

OFF
MANUAL
AUTO ↙

ATW
↙
↙

ENGLISH
↙

SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT

OFF
MANUAL
AUTO ↙

ATW
↙
↙

ENGLISH
↙

Main Menu -

LENS

1) LENS setup

① Press LEFT or RIGHT button in LENS on Main Menu to select the mode to

MANUAL ◀ ▶ VIDEO ◀ ▶ DC ↙.

2) DC LENS setup

① Press MENU button in DC ↙ to display the screen on the right side.

② Use LEFT, RIGHT button to change BRIGHTNESS(IRIS LEVEL) value.

③ Press MENU button to return to the previous screen.

LENS DC

BRIGHTNESS

↙ : RETURN

056

ID SETUP

CAMERA ID

A ↙

POSITION

RETURN

Menu [SHUTTER] -

AUTO Mode Setup

1) SHUTTER setup (for LENS MANUAL)

① Press LEFT or RIGHT button in SHUTTER

to select the mode to

AUTO ↙ ◀ ▶ FLK ◀ ▶ FIXED ↙

◀ ▶MANUAL ↙.

2) AUTO ↙ setup (AE LEVEL setup)

① Press MENU button in AUTO ↙ to display the

screen on the right side.

② Use LEFT, RIGHT button to change

BRIGHTNESS(AE LEVEL) value.

③ Press MENU button to return to the previous screen.

SHUT TER AUTO

BRIGHTNESS

↙ : RETURN

056

1) MOTION OSD description

① ALL CLEAR - Release all set AREA

② ALL SET - Set all 64 MOTION AREA.

③ RETURN - Return to MOTION AREA Setup Mode.

④ EXIT - Save AREA and return to MOTION SETUP MODE.

1) LANGUAGE setup

① DEFAULT value - ENGLISH

② After selecting LANGUAGE,

change setting using LEFT or RIGHT button.

③ Choose the language mode you

wish to operate in.

1) RESET

① Select RESET.

Press MENU button.

The screen on the bottom appears.

② Select YES or NO.

③ Select YES to reset your camera

to default factory condition

Main Menu -

FUNCTION

BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN

OFF
ON ↙

AUTO ↙

OFF
OFF
0.45
OFF

1) FUNCTION ↙ setup

① Press MENU button in FUNTION

to show the OSD display on the right.

2) Select item using UP, DOWN button.

3) Set details using LEFT, RIGHT button.

4) Click "Return" to go to MAIN SETUP

1) ADJUST setup

① Press MENU button in ADJUST.

2) CONTRAST setup

① Adjust Y-gain value (0~255)

3) SHARPNESS setup

① Adjust aperture value (0~31)

4) CB_GAIN setup

① Adjust COLOR CB_GAIN value (0~255)

5) CR_GAIN setup

① Adjust COLOR CR_GAIN value (0~255)

② Move to screen on the right side.

Menu [SHUTTER] -

FIXED & MANUAL Mode Setup

1) FIXED ↙ setup (MANUAL,DC,VIDEO LENS)

① Press MENU button in FIXED ↙

to display the screen on the right side.

② Press LEFT or RIGHT button in SHUTTER.

Can be set in ([NTSC: 1/60 ~ 1/100,000]

[PAL: 1/50 ~ 1/100,000]) range.

2) MANUAL ↙ setup (MANUAL, DC, VIDEO LENS)

① In SHUTTER Manual,

press LEFT or RIGHT button.

(SHUTTER M. value is changed between

0<MIN> ~ 255<MAX>.)

0(MIN):1/50 or 1/60, 255(MAX):1/100,000

② Press MENU button to return

to the previous screen.

SHUT TER FIXED

SHUTTER M : 1/60

↙ : RETURN

SHUT TER MANUAL

SHUTTER M.

↙ : RETURN

000

LOAD DEFAULT

YES

Menu [WHITE BAL.] -

WHITE BALANCE Mode Setup

1) WHITE BALANCE setup

① In WHITE BAL., press LEFT, RIGHT button

to select the mode you wish to operate

ATW ◀ ▶ AWB ◀ ▶ FIXED ↙

◀ ▶MANUAL ↙.

2) FIXED ↙ setup

① Can set from MODE 1 to MODE 4.

3) MANUAL ↙ setup

① As shown on the lower right picture,

set Red and Blue color value temperature.

② Press MENU button in RETURN

to exit from setup mode.

AWB FIXED

AWB FIXED : MODE 1

↙ : RETURN

AWB MANUAL

RED

BLUE

↙ : RETURN

113

255

Menu [FUNCTION] -

BLC 3

1) BLC RATIO setup (BLC LEVEL value setup)

① Use UP,DOWN button

to move to BLC RATIO.

② Use LEFT, RIGHT button

to change BLC LEVEL value (0~63)

0:MIN , 63:MAX

③ Press MENU button in RETURN

to move to FUNCTION MODE.

BLC SETUP

BLC AREA ↙

BLC RATIO

RETURN

Menu [FUNCTION] -

AGC

1) AGC setup

① AGC default setting ON ↙

② Press MENU button in ON ↙

to display the screen on the right side.

③ Use LEFT, RIGHT button

to adjust AGC GAIN value (0~255)

0:MIN , 255:MAX

④ Press MENU button to return

to the previous screen.

AGC CONTROL

AGC GAIN

↙ : RETURN

095

Menu [FUNCTION] -

BLC 1

2) BLC AREA ↙ setup

① Use UP, DOWN, LEFT, RIGHT button

to move the AREA setup position.

② Set or release BLC AREA

using MENU button.

③ Press MENU button for more than 1 second

to move to BLC AREA MODE.

1) BLC SETUP MODE

① Press MENU button in BLC ON ↙ ,

to display the screen on the right side.

BLC SETUP

BLC AREA ↙

BLC RATIO

RETURN

Menu [FUNCTION] -

DAY NIGHT 3

DAY NIGHT B/W

BURST

1) B/W ↙ mode setup

① Press MENU in B/W ↙ setting

② Move to screen on the right side.

③ Use LEFT, RIGHT button

to set BURST ON / OFF.

④ After setup, return to the previous screen

by pressing MENU button.

Menu [FUNCTION] -

BLC 2

2) BLC OSD description

① ALL CLEAR - Clear all set AREA

② ALL SET - Set all 64 BLC AREA

③ RETURN - Return to BLC AREA setup mode.

④ EXIT - Save AREA and return to

BLC SETUP MODE.

1) BLC AREA MODE

① Exit from BLC AREA MODE

to move to BLC SETUP MODE screen.

BLC AREA

ALL CLEAR
ALL SET
RETURN
EXET

Menu [FUNCTION] -

DAY NIGHT 1

DAY NIGHT AUTO

DELAY

START LEVEL

END LEVEL

RETURN

092

074

2) AUTO ↙ mode setup

① Press MENU button in AUTO ↙ setup mode.

② Move to screen on the right side.

③ Select item using UP / DOWN button.

④ Adjust value using LEFT / RIGHT button.

⑤ Press MENU in RETURN to return

to the previous screen.

1) DAY NIGHT setup

① Move to DAY NIGHT screen on the right side.

② Change setting using LEFT, RIGHT button.

AUTO ↙ ◀ ▶ B/W ↙ ◀ ▶ COLOR.

FUNCTION

BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN

OFF
ON ↙

AUTO ↙

OFF
OFF
0.45
OFF

Menu [FUNCTION] -

PRIVACY

2) PRIVACY details setup

① Select AREA SEL - PRIVACY 0~3.
② AREA STATE - 0~3 AREA ON/OFF
③ LEFT - Change left portion of each AREA size.
④ RIGHT - Change right portion of each AREA size.
⑤ TOP - Change top portion of each AREA size.
⑥ BOTTOM - Change bottom portion of each AREA size.
⑦ COLOR - Change entire color of the AREA (16 COLOR)

1) PRIVACY setup

① Default setting OFF - Use LEFT,RIGHT button.

Change setup to ON ↙ mode.
② After ON ↙ mode setup, 4 AREA groups are

configured as displayed on the right-side picture.
③ Press MENU button.

Details of each area is dsplayed.

FUNCTION

BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN

ON ↙

AUTO ↙

ON ↙

OFF
0.45
OFF

PRIVACY

AREA SEL
AREA STATE
LEFT
RIGHT
TOP
BOTTOM
COLOR
RETURN

AREA 0

017
058
020
055
001

Setting value can be adjusted

using LEFT or RIGHT button.

When using DC AUTO IRIS LENS:

Select DC in LENS SETUP under OSD

menu, and place LENS SELECTION

SWITCH at DC in the REAR PANEL
When using VIDEO AUTO IRIS LENS:

Select VIDEO in LENS SETUP under

OSD menu, and place LENS SELECTION

SWITCH at VIDEO in the REAR PANEL

MOTION

AREA ↙

MOTION TH.

MOTION TRACE

RETURN

037

OFF

FUNCTION

BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN

OFF
ON ↙

AUTO ↙

OFF
OFF
0.45
OFF

Menu [FUNCTION] -

MOTION

1) MOTION DETECTION setup

① DEFAULT value OFF

2) AREA ↙ setup

① In AREA ↙ , press MENU button. (see p.32)

3) MOTION TH. Setup

① Set motion sensitivity 0(MAX)~255(MIN)

4) MOTION TRACE setup

① ON : Display motion detection AREA.

② In ON ↙ , press MENU button.

③ Display MOTION details.

Menu [FUNCTION] -

GAMMA

FUNCTION

BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN

OFF
ON ↙

AUTO ↙

OFF
OFF
0.45
OFF

1) GAMMA setup (DEFAULT 0.45)

① In FUNCTION MODE,

use UP, DOWN button to select GAMMA.

② Use LEFT, RIGHT button

to adjust GAMMA value.

(USER ◀ ▶ 0.05 ◀ ▶ 0.10 ◀ ▶ 0.15 ~ 1.0)

Menu [FUNCTION] -

DAY NIGHT 2

DAY --> NIGHT or NIGHT --> DAY conversion time setup

0 : No DAY NIGHT AUTO conversion

1~63 : Can set from 1 second to 15 seconds

Initial value setup is recommended.

1) DAY NIGHT OSD description

① DELAY

DAY --> NIGHT conversion illumination intensity setup 0~255 (DEFAULT : 4 Lux)

0 : High illumination intensity, 255 : Low illumination intensity

② START LEVEL

NIGHT --> DAY conversion illumination intensity setup 0~255 (DEFAULT : 12 Lux)

0 : High illumination intensity, 255 : Low illumination intensity

③ END LEVEL

Menu [FUNCTION] -

MIRROR

OFF

FUNCTION

BLC
AGC
DAY NIGHT
PRIVACY
MIRROR
GAMMA
MOTION
RETURN

OFF
ON ↙

AUTO ↙

OFF
OFF
0.45
OFF

1) MIRROR setup

① MIRROR default setting OFF

ON setting - Use LEFT, RIGHT button.

② Left and Right side is switched

as shown on the picture.

Menu [FUNCTION] -

MOTION AREA 1

2) MOTION AREA MODE

① You will return to MOTION AREA MODE

after "Exit" from MOTION AREA MODE.

1) MOTION AREA setup

① Use UP, DOWN, LEFT, RIGHT button

to move AREA setting position.

③ Press MENU button for more than 1 second

to move to MOTION AREA MODE

② Use MENU button to set and release AREA.

MOTION AREA

ALL CLEAR
ALL SET
RETURN
EXET

ADJUST
CONTRAST

SHARPNESS

CB_GAIN

RETURN

083

190

205

SETUP
CAMERA ID
LENS
SHUTTER
WHITE BAL.
FUNCTION
ADJUST
LANGUAGE
RESET
EXIT

OFF
MANUAL
AUTO ↙

ATW
↙
↙

ENGLISH
↙

ICR

. Back-focus Adjustment

. Mounting a Lens

F.G

12VDC

24VAC

POWER INLET

③ Power AC IN

Connecting to Monitor

DC 12V

Class 2 Only

MENU

POWER

VIDEO

VIDEO OUT

DC 12V

Power Source

NOTE

Do not turn any component's power

on until all connections are completed.

To Power input terminal

To Video input connector

For BNC Video Output Model

• Connect the video output of the camera to the video input of a monitor or other equipment.
When using a "loop through" connection of two or more monitors, set the 75Ω switch of only the final
monitor to on. Determine the type of cable according to the distance of the connected equipment.

Class 2 Only

MENU

POWER

VIDEO

VIDEO OUT

24VAC

UTP OUT

For UTP Video Output Model

Camera

Monitor(or DVR)

300m(Max)

UTP Cable

UTP Receiver

• Connect UTP (Unshielded Twisted Pair) wire to the UTP output of the camera directly.

UTP transmitter is included in the camera therefore additional UTP transmitter is not necessary.
• UTP receiver is necessary to connect UTP wire to Monitor or DVR.
• When connecting UTP wire, make sure the polarity of the video signal.
• Use UTP wire "CAT5 24AWG" to have the best transmission quality.
• The twisted-pair output cannot be used at the same time as the composite video output.
• 24VAC only

38
39

...........................

..................

40
42

..................

...........................

. Lens Connector

. Connecting to Monitor

24VAC / 12VDC Input Model

UTP option

12VDC Input Model

ICR

24VAC/12VDC Input Model

ICR & UTP option

. 24VAC/12VDC Input Model

ICR&UTP option

. 100VAC-240VAC Input Model

ICR

. 12VDC Input Model

ICR

UTP option

ENGLISH ◀ ▶ Korean ◀ ▶ Chinese1 ◀ ▶ Chinese 2 ◀ ▶ Japanese

Advertising

This manual is related to the following products:

GS3760NF

Popular Brands

Popular manuals