CognitiveTPG A799II - Manual (Page 8)

Chapter 2: About the Printer 8
A799II Two-Color Thermal Receipt Printer: User Guide A799-2UG0000 Rev. A 09/2013
Printer controls
Paper feed button
During normal use, the paper feed button advances the paper. It is also used to access the configuration menu as described
in Chapter 4, Configuring the Printer.
LED
The green LED indicates basic information about the printer status. A steady green light means the printer is on and
operating normally. A flashing LED means the printer needs operator assistance. Refer to the troubleshooting section on
page 29 for more information.
Beep
A single beep means the printer has successfully completed its startup routine. It should beep after being powered up or
reset.
If the printer beeps twice, it may be experiencing a problem. Refer to the troubleshooting section on page 29 for more
information.
Connector Cover
The connector cover provides protection and strain relief for the printer connectors and cables. This cover should remain
on the printer and utilized as described in Chapter 3, Cable routing.
LED
(Green)
Paper
Feed
Button
Connector Interface Panel
Connector Cover
(Open Position)