CognitiveTPG A760 - Manual (Page 2)

3
Install the ribbon cassette (page 18).
4
Choose a location for the printer (page 19).
5
Connect the following cables based on your configuration using a-d below.
When using USB (step “b” below), use caution to ensure
the USB cable is connected to the USB connector (A) on
the back right of the printer and not into the cash drawer
connector (B) that is on the left back of the printer.
a
Cash drawer (if your installation includes this feature, page 20).
b
9-pin or 25-pin Serial, parallel, USB or Ethernet cable (page 21).
Note: The Ethernet connection requires specific setup commands. See “Ethernet
communication cable installation” and “Ethernet setup commands” sections in the
A760 User Guide.
c
Connect the power cable (page 21).