CognitiveTPG Advantage LX - Manual (Page 10)

RTEL PORT
Function:
The VARIABLE ETHERNET RTEL PORT command sets the reverse tel-
net port address.
Command Form:
VARIABLE ETHERNET RTEL PORT X
Parameters:
X (default is 9100)
Comments: Changes to this value are not recommended.
Example:
! 0 0 0 0
VARIABLE READ
VARIABLE ETHERNET RTEL PORT 9100
VARIABLE WRITE
VARIABLE ETHERNET RESET
END
TELNET
Function:
The VARIABLE ETHERNET TELNET command enables or disables
Telnet communications with the printer.
Command Form:
VARIABLE ETHERNET TELNET status
Parameters: ON / OFF (default is ON)
Example:
! 0 0 0 0
VARIABLE READ
VARIABLE ETHERNET TELNET ON
VARIABLE WRITE
VARIABLE ETHERNET RESET
END
10
Variable Ethernet Commands