CognitiveTPG DLXi - Manual (Page 13)

13
Chapter 3: Installing CognitiveTPG Printer
Administrator and Print Drivers
CognitiveTPG Printer Administrator is a Java based utility designed for installation on
various operating system platforms. Administrator allows complete control over the
profiles and settings of the DLXi printer.
Downloading CognitiveTPG Printer Administrator
In order to easily make printer configuration changes, install the CognitiveTPG Printer
Administrator Utility. Follow the CognitiveTPG Printer Administrator installation
instructions at http://www.CognitiveTPG.com/resources_utility.aspx for the DLXi
printer. You can also follow this path: http://www.CognitiveTPG.com > Downloads >
Utility. This process will also install Windows driver for the printer on your computer.
Note that USB, Ser/COM, or Ethernet connection is required for configuring your
printer via this utility.
After downloading and installing CognitiveTPG Printer Administrator and driver files,
connect the printer to your computer and power it on. If connected via USB, your
computer will recognize the printer identification and either load the appropriate
driver or open up a wizard to add the printer. For reference, driver files are downloaded
to the following location on the computer: C:\Program Files\Cognitive\Drivers.
NOTE: INSTALLING
COGNITIVETPG
PRINTER
ADMINISTRATOR
WILL ALSO LOAD
PRINT DRIVERS
FOR COGNITIVETPG
LABEL PRINTERS.
COGNITIVETPG
PRINTER
ADMINISTRATOR
UTILITY IS VERY
USEFUL FOR
CONFIGURING,
TROUBLESHOOTING,
AND UPDATING THE
DLXI PRINTER.
NOTE: MAKE
SURE YOU HAVE
ADMINISTRATIVE
RIGHTS TO YOUR
COMPUTER TO
DOWNLOAD THE
UTILITY AND
DRIVERS.
NOTE: FOR BEST
RESULTS, POWER
OFF PRINTER PRIOR
TO INSTALLING
COGNITIVETPG
PRINTER
ADMINISTRATOR
AND PRINTER
DRIVERS.