Conveyor Technologies SCANNER MOUNT CONVEYORS - Manual

- .8 Meter edge length
- Hand crank width adjust = 2.0” – 16.0”
- Board edge clearance = .100” (.060” min)
- Steel welded frame
- Heavy-duty aluminum extruded rails
- Auto/Manual select switch
- 10 Inch bottom side clearance
- Controls to transfer reader data
Top and Bottom Mounting Configurations
- Swivel bar code read mounting bracket
- Y Axis automatic gantry
- X and Y automatic gantry
STANDARD FEATURES:
OPTIONS:
Scanner Mount Conveyor Series
PN:
CCS or CCG
SPECIFICATIONS:
• PCB Size: ................................... Min. 2” X 4”
................................................. Max.16” X 18”
• PCB Height:................................ 37.5” + - 2”
• Edge Clearance:..... .100” from edge of PCB
• Air Requirements:.................2 cfm @ 25 PSI
• Power Requirements: ..... 5 amps @ 120VAC
• PCB Max Weight: ................................. 10 lb.
• PCB Min. Thickness: ..............................010”
• PCB Max. Thickness: .............................180”
- Speed Control
- Pneumatic PCB Stops
- HMI for Operator interface
- Light Tower with Alarm
- Automatic Width Adjust
- Controls for Reader Data Transfer
- Readers available from any supplier
- Dust Covers
- Line Networking
- Workstation Configurations
Scanner Mount Series Conveyors are designed to be able to mount a
bar code reader either top or bottom side at any position along the
conveyor with out interference from other conveyor hardware.
Bar code readers can be mounted on manual positioning brackets or on
an automated gantry for precise hands free set-up.
Scanner Mount Series Conveyors are also capable of lots of 1
automatic setup for individual and adjacent machines.