Conveyor Technologies RT/LT-30I - Manual

PCB Size Min: 2.0” x 4.0”
Max: 14.0” x 18.0”
PCB Height 37.5 Inches + 2”
Air Requirement .2 cfm @ 65 PSI
Power Requirement 110 VAC, 15A
Cycle Time 9 Seconds
STANDARD SPECIFICATIONS:
24
PN: RT/LT 301I
DEDICATED TURN TABLE SMTS
STANDARD FEATURES:
• Pneumatic Rotation Drive
• Edges of Conveyor are Flush with Edges of
Adjacent Machines During Transfer
• Right or Left Turn Only
(Can be Reconfigured in 1 hr. in the Field)
• Totally Enclosed for Safety
• PLC Controls with SMEMA Cables
• Board Edge Clearance = .100” (.060” min)
• Hand Crank Width Adjust = 2.0” - 14.0”
• 1/2” Steel Welded Frame
• Capable of 2 Different Configurations
for Fixed Rail Locations
• Safety Sensors Located at Each
Transfer Position
OPTIONS:
• Light Tower for Indicating Operating Status
• Speed Control
• 32” Line Height
30.000"
4.369"
4.369"
37.500"
30.000"
36.000"