Conveyor Technologies HWO-7F-2 - Manual

PCB Size Min: 3.0”x 5.0”
Max: 20.0”x 24.0”
Power Requirement 110 VAC, 15A
Cycle Time
(Pending Wave Speed)
STANDARD SPECIFICATIONS:
PN: HWO-7F-2
HYBRID WAVE OUTPUT CONVEYOR THS
STANDARD FEATURES:
• 1/2”Edge Belt Conveyor
• Receives PCB at 6 Degree Angle, Declines to
Match Down Stream Conveyor Height
• 4 Conveyor Sections
• Power Wheels at Entrance to Insure
Positive Transfer
• High Temp ESD Timing Belts on Entrance
and Exit Sections
• Speed Control
• Adjustable Entrance Receive Angle
• Power Dogs On Decline
• Stages Boards & Allows Cooling Before
Next Process
• Buffers Approx.3 Boards Depending
on Length
• Eliminates PCBs or Heavy Pallets Sliding
Down Ramp
• Allows Time for Cooling
• Board Edge Clearance = .060”- .375”
• PLC Controls with SMEMA Cables
• Nominal Length 7’, Will Vary Depending on Entrance
and Exit Heights
• Hand Crank Width Adjust = 3.0”- 20.0”
• 1/2”Steel Welded Frame
18.000" 66.000"
84.000"
20.000"
26.200"
37.500"
+/- 2.0"
52.000"
+/- 2.0"
OPTIONS:
• Auto Width Adjust
• Speed Matching to Wave Solder
• Cooling Fans
• Custom Height and Lengths
(48”- 58”Entrance, 32”- 38”Exit)
• Multiple Slope Combinations
• Flat Belt Conveyor
• Wire Mesh Conveyor
• Edge Chain Conveyor
• Warning Light Alarm
37